Starlink Mini Heavy-Duty Suction Cup Mount with Clamp

TESSTUDIO · STARLINK MINI MOUNTING Heavy-Duty Mounting Without Drilling Permanent Holes Secure Starlink Mini to compatible smooth surfaces or round rails with a modular suction-cup base, adjustable clamp mount and multi-angle positioning system. 2-Cup / 3-Cup Choose your suction base 360° Rotation Horizontal positioning 90° Tilt Vertical angle adjustment Black · Silver · Red Multiple base options ONE MOUNT · MORE PLACEMENT OPTIONS Move Starlink Mini Instead of Committing to One Permanent Location Use suction mounting on compatible smooth surfaces or switch to the clamp when a rail or round tube gives you a better installation point. 01 Suction-Mount It Create a temporary mounting point on clean, flat and non-porous compatible surfaces. 02 Clamp It to a Rail Attach the adjustable clamp to compatible round tubing, railings and similar support structures. 03 Adjust the Angle Reposition Starlink Mini without removing and reinstalling the entire mounting base. Find the Angle That Works for Your Setup The articulated support gives you substantially more positioning freedom than a fixed-angle suction mount. 360° Horizontal + 90° Vertical Adjustment Rotate the upper mount through 360 degrees horizontally and adjust the vertical position through up to 90 degrees. This helps when the available mounting surface is not located at the exact angle you want for Starlink Mini. 360° horizontal rotation Up to 90° vertical adjustment Locking adjustment knob Quick repositioning without removing the base From Starlink Mini Mount to Adjustable Rail Clamp The included clamp expands the installation options beyond flat suction-compatible surfaces. Adjustable 16–49.8 mm Clamp Range The clamp is designed to grip a range of compatible round tubes and rails, making it useful around boats, RV equipment, railings and outdoor structures. Approx. 16–49.8 mm / 0.63–1.96 in clamp range 1/4"-20 accessory interface Adjustable locking clamp Suitable for multiple round-rail diameters Built Around the Parts That Take the Load The suction system combines thick rubber sealing surfaces, alloy handles and reinforced locking hardware. Heavy-Duty Suction Hardware Each suction point uses a thick rubber contact pad with a mechanical locking lever to create and maintain suction against a suitable clean surface. Thickened rubber suction pad Non-slip alloy handle structure Reinforced locking buckle Reusable mechanical suction design Designed for Real Outdoor Starlink Setups Built for RV, vehicle and outdoor environments where changing weather is part of normal use. Important: Suction holding force depends heavily on surface material, cleanliness, temperature, installation quality and dynamic load. Inspect every suction cup before use and recheck it regularly. For exterior use on a moving vehicle, use an appropriate secondary safety retention method. CHOOSE THE BASE 2-Cup or 3-Cup — Choose the Structure for Your Setup Both versions are designed around Starlink Mini. The three-cup version adds another suction point and a wider triangular footprint. Compare Suction Cup Options Cup diameter and listed static suction ratings vary by color and suction-cup configuration. Color Base Cup Size Horizontal Vertical Black 2-Cup 123 mm 115 kg 100 kg Black 3-Cup 123 mm 190 kg 117 kg Silver 2-Cup 110 mm 90 kg 70 kg Silver 3-Cup 110 mm 110 kg 90 kg Red 2-Cup 150 mm 150 kg 130 kg Red 3-Cup 150 mm 250 kg 230 kg About the ratings: The values above are the listed static suction-force ratings for the corresponding variants. They are not vehicle payload ratings and should not be interpreted as guaranteed holding force in vibration, wind, rain, dirt or high-speed driving conditions. Three Colors. Two Suction-Cup Configurations. Choose Black, Silver or Red and pair it with either a dual or triple suction-cup base. One Mount for More Than One Kind of Trip Use the suction base or clamp system to adapt Starlink Mini to different temporary mounting environments. RV / Caravan Temporary exterior mounting Boat / Rail Use the adjustable clamp Vehicle Compatible smooth surfaces Outdoor Structures Flat surfaces or round rails Clean the Surface. Lock the Cups. Mount Starlink Mini. Correct surface preparation is one of the most important parts of suction-cup performance. STEP 01 Clean the Surface Remove dust, grease and moisture from the mounting area. STEP 02 Press Out the Air Press each suction cup firmly against a smooth surface. STEP 03 Lock Every Lever Fully engage each suction-cup locking buckle. STEP 04 Attach the Bracket Secure the adjustable upper support to the suction base. STEP 05 Mount Starlink Mini Attach Starlink Mini and tighten the locking hardware. STEP 06 Check Before Use Test every suction point before leaving the mount unattended. COMPATIBILITY CHECK Check Your Mounting Surface Before Ordering Suction cups perform best on smooth, flat, clean and non-porous surfaces. Designed For Starlink Mini Base Options 2-Cup or 3-Cup Color Options Black, Silver, Red Horizontal Adjustment 360° Vertical Adjustment Up to 90° Clamp Range Approx. 16–49.8 mm / 0.63–1.96 in Accessory Interface 1/4"-20 Best Suction Surfaces Smooth glass, smooth painted panels and other clean, flat non-porous compatible surfaces Avoid Rough walls, textured paint, dirty surfaces, uneven seams, porous materials and damaged mounting areas Other Starlink Models Current compatibility artwork identifies Starlink Mini; compatibility with Standard, Gen 3 or High Performance should not be assumed Starlink Mini Included No Frequently Asked Questions Is this suction mount designed for Starlink Mini? Yes. The current compatibility design is intended for Starlink Mini. Other Starlink models use different dimensions and mounting systems, so compatibility should not be assumed. What is the difference between the 2-Cup and 3-Cup versions? The 2-Cup version uses two suction points and has a more compact footprint. The 3-Cup version adds a third suction point and creates a wider triangular base. Listed suction-force ratings also vary by version and color. Which colors are available? The current product selector offers Black, Silver and Red suction-cup base options. Can I adjust the Starlink Mini angle? Yes. The support provides 360° horizontal rotation and up to 90° vertical adjustment so the mounted equipment can be repositioned without moving the entire suction base. What surfaces work best with the suction cups? Use a clean, smooth, flat and non-porous surface. Glass and suitable smooth painted panels generally provide a much better seal than textured, dirty, porous or uneven materials. Can the mount attach to a round rail or tube? Yes. The included adjustable clamp is designed for compatible round tubing approximately 16–49.8 mm (0.63–1.96 inches) in diameter. Does the mount support 1/4"-20 accessories? Yes. The current clamp-and-arm design includes a standard 1/4"-20 interface that can also support compatible cameras, lights and other accessories when used within appropriate loads. Can I install it on an RV? Yes, provided the selected RV surface is smooth, clean, non-porous and suitable for suction mounting. Do not place the cups across seams, trim, grooves or curved edges. Can I use it in the rain? The mount is designed for outdoor use, but suction performance can change with water, dirt, temperature and surface conditions. Inspect and retest the mount regularly. Can it stay mounted while driving? Exterior vehicle use introduces vibration, wind load and changing road conditions that are very different from static suction tests. Check local requirements and use a suitable secondary safety retention system whenever the installation could create a road hazard. How should I prepare the mounting surface? Clean the area thoroughly and remove dust, grease and moisture. Press every cup firmly against the surface to remove air, then fully close every locking lever before installing Starlink Mini. Can the suction cups be reused? Yes. Release the locking levers carefully, remove the mount and keep the rubber suction surfaces clean and free of damage before the next installation. Is Starlink Mini included? No. Starlink Mini and other equipment shown in lifestyle images are for demonstration and are not included unless specifically stated in the selected product option. Build a More Flexible Starlink Mini Setup Add a second mounting option or portable power for travel, camping and vehicle use. FREESTANDING MOUNT Starlink Mini Adjustable Tripod Stand Add a portable ground-standing option for campsites, RV stops and remote work. GLASS MOUNTING Starlink Mini Window & Sunroof Suction Mount Create a removable mounting solution for compatible smooth glass surfaces. PORTABLE POWER Starlink Mini 99Wh Portable Power Bank Add portable stored power for camping, travel and remote-work connectivity. Shop All Starlink Accessories Starlink is referenced solely for product compatibility identification. Tesstudio is an independent accessories provider and is not affiliated with or endorsed by Starlink or SpaceX. Listed suction ratings are variant-specific static values. Actual holding performance depends on surface condition, temperature, installation, vibration, wind and load.