Release Film for Anycubic Photon Mono 4 / 4 Ultra (220 × 160 mm) – FEP, PFA (nFEP) or ACF

Pre-cut release film for the Anycubic Photon Mono 4 / 4 Ultra, cut to 220 × 160 mm so it drops straight into the vat frame with no measuring, no cutting and no wasted roll. Sheets are cut from fresh factory rolls, packed flat with protective liners, and shipped from our Gold Coast store.Choose your film type from the Film type option above — FEP, PFA (nFEP) or ACF. Not sure which to pick? See the comparison below and in the product images.Changing your film is a ten-minute job — follow our Installation Guide.Which film should I choose? FEP (5 pack) — the proven everyday film. Standard fluoropolymer release film. Clear, affordable and forgiving. Five sheets per pack so you always have spares on the shelf. PFA nFEP (2 pack) — lower peel force, longer life. nFEP is a PFA-based film with a lower surface tension than FEP, so models release with less peel force. Gentler on fine supports, quieter, and it lasts noticeably longer between changes. Two sheets per pack. ACF (2 pack) — the fast-print film. ACF is the frosted, textured release film that ships on many current printers such as the Saturn 4 Ultra and Photon Mono M7 series. Its micro-texture breaks the vacuum between the model and the film, allowing much faster lift speeds and a low peel force on large flat layers. Two sheets per pack. FEP PFA (nFEP) ACF Sheets per pack 5 2 2 Thickness 0.15 mm 0.15 mm 0.3 mm Light transmission ≥ 95% ≥ 95% High (frosted finish) Model release Good Excellent Excellent Service life Standard (typically 20–30 prints) Long (typically 2–3× FEP) Long Finish Clear Clear Frosted / textured Key Features Cut to fit: exact vat-frame size for the listed printers, no trimming needed. High durability: resists resin, UV and repeated peel cycles. Excellent light transmission: even curing across the whole build plate. Easy model release: low surface energy so prints lift cleanly off the film. Packed flat: protective liners both sides, no creases or scratches. Specifications Dimensions: 220 × 160 mm Compatibility: Anycubic Photon Mono 4 / 4 Ultra Film types: FEP (5 pack) · PFA nFEP (2 pack) · ACF (2 pack) Thickness: FEP and PFA (nFEP) 0.15 mm; ACF 0.3 mm Light transmittance: ≥ 95% (FEP / PFA (nFEP)) Temperature resistance: FEP 205 °C continuous / 260 °C peak Brand: NovaFEP release film, stocked and cut by 3docity Compatibility is based on the vat-frame film size. If your printer isn't listed but uses the same size, it will fit — ask us if unsure.