Freestanding 316 Stainless Steel Outdoor Shower with 10-Inch Rain Head & 360° Swivel Rinse Spout

316 Stainless Steel Outdoor Shower Column: Designed for freestanding installation, this brushed-metal shower column brings a clean architectural profile to pool decks, private gardens, coastal homes, and outdoor bathing spaces. Its 316 stainless steel construction offers enhanced resistance to chloride-related corrosion compared with 304 stainless steel, making material selection particularly relevant for outdoor environments. Round Rain Shower Head: The 10-inch overhead shower head sits on a sweeping curved arm, creating a distinctive silhouette while positioning the water outlet over the bathing area. Its round spray face provides overhead rinsing after swimming, beach activities, or outdoor exercise. 360° Rotating Lower Rinse Spout: The independently rotating lower outlet can turn through a full 360 degrees, allowing the discharge direction to be adjusted to suit the surrounding space. Use it to rinse sandy feet, wash away garden debris, or direct water toward a convenient cleaning area without repositioning the entire shower column. Separate Handheld Shower with Flexible Metal Hose: The handheld sprayer offers targeted water delivery when overhead rinsing is impractical. Its flexible hose supports tasks such as washing pets, rinsing children, cleaning the shower area, and removing residue from hard-to-reach spots. Hot & Cold Mixing with Three-Outlet Selection: Two dedicated rotary controls provide temperature adjustment and water outlet selection. Choose the overhead rain shower, handheld sprayer, or lower rinse spout according to the task, combining personal showering and outdoor cleanup in one floor-mounted fixture. Technical Specifications: Installation Type Freestanding Finish Options Brushed Nickel / Matte Black Material 316 Stainless Steel Shower Head Size 10" Valve & Diverter Hot & Cold Mixer with 3-Way Diverter Flow Rate 1.8 GPM Product Weight 29.76 lb Installation Notes: Confirm that the floor-mounted plumbing connections match the product inlet configuration and that hot and cold water supplies are available before installation. Check the mounting substrate, anchor positions, and floor structure before securing the circular base. The finished installation must remain stable during normal operation. Allow sufficient overhead clearance for the curved shower arm and adequate space around the lower spout for its full 360-degree rotation. Position the shower so that the overhead spray and lower outlet discharge into a suitable drainage area. Avoid directing water toward electrical equipment, doorways, or surfaces where standing water could create a hazard. Verify the control positions and water connections against the product-specific installation drawing. Do not determine pipe connections solely from the external appearance of the fixture. After installation, test hot and cold temperature adjustment and operate each of the three outlets separately. Inspect the inlet connections, diverter, handheld hose, rotating spout, and base area for leakage. For locations exposed to freezing temperatures, follow an appropriate shutoff and drainage procedure to prevent water trapped inside the exposed shower assembly from freezing. Care & Maintenance: Rinse the exterior with fresh water after exposure to pool chemicals, salt spray, sand, or other outdoor contaminants. Regular rinsing is especially important in coastal and swimming-pool environments. Clean the brushed surface using mild soap, clean water, and a soft cloth. Dry the metal after cleaning to reduce water spots and mineral residue. Avoid steel wool, abrasive scouring pads, hydrochloric acid, bleach-based cleaners, and other aggressive chemicals that may damage the finish or contribute to surface corrosion. Periodically rotate the lower spout through its intended range and inspect its connection for smooth movement, leakage, or looseness. Do not force the fitting if resistance develops. Check the handheld hose, outlet selector, temperature control, mounting fasteners, and exposed connections periodically, particularly after seasonal shutdown or extended outdoor use. In freezing conditions, drain the shower according to the manufacturer's instructions. 316 stainless steel does not eliminate the risk of freeze damage to water-filled pipes, valves, or fittings. Downloads: Installation Manual