Reed Wall Sconce

‹ › Reed Wall Sconce The C&C Reed Wall Sconce is a slim black LED rod on a small round backplate. A soft warm glow washes the wall along both sides of the rod, so the fixture reads as a fine line of light. Use it as a pair flanking a mirror or doorway, or repeat it along a hallway for a clean, rhythmic accent. 120-277V 8W max Integrated LED Triac dimmable Black finish ETL listed Dry locations Download Spec Sheet Highlighted Features Slim Vertical Rod A slender black rod adds a fine, architectural line to the wall. Soft Wall Glow A gentle warm glow along both sides of the rod lights the wall without glare. Round Black Backplate A low, compact disc that anchors the rod and hides the wiring. Minimal Black Finish A clean black look that suits modern, industrial and hospitality interiors. Integrated LED A built-in LED source of 8W maximum, with no lamps to replace. Dimmable Dims at 120V on a compatible triac (forward-phase) dimmer. Universal Voltage Runs on 120-277V, 50/60Hz, for use across residential and commercial projects. Certified ETL listed to UL 1598 and CSA C22.2 No. 250.0, for dry locations. How to Order The Reed Wall Sconce is a single wall-mounted fixture, and it is most often specified as a pair or as a repeated run along a wall. To place an order, contact us at info@candclight.com with your project name, quantity and the dimmer you plan to use. C&C-69573B Model Voltage 120-277V AC input, 50/60Hz Power 8W Maximum LED Integrated Driver 24V DC, 500mA output Triac Dimming at 120V Listing ETL Listed (cETLus) Dry Locations only For full technical specifications, download the product spec sheet. Download Spec Sheet More About the Reed Wall Sconce Specifications at a Glance Model C&C-69573B Input voltage 120-277V AC, 50/60Hz Power 8W max Light source Integrated LED Driver Constant current, Class 2 Driver output 24V DC, 500mA Power factor Above 0.9 Dimming Triac, at 120V Form Slim vertical rod on round backplate Finish Black Mounting Wall Location rating Dry locations only Certification ETL listed (cETLus) Standards UL 1598, CSA C22.2 No. 250.0 Design and Finish The name Reed comes from the slender, upright stalk the fixture resembles. A single thin black rod with small end caps stands centered on a low, round black backplate, reaching equally above and below it. The result is a graphic vertical line with very little visual weight. A soft warm glow along both sides of the rod lights the wall behind it, so the fixture works as both a decorative mark and a gentle source of light. The black finish contrasts cleanly with plaster, paint, timber and stone. Driver and Dimming Reed uses a constant current, Class 2 LED driver with a 24V DC, 500mA output and a power factor above 0.9. It accepts 120-277V at 50/60Hz, and the fixture draws a maximum of 8W. The driver is dimmable at 120V on a compatible triac (forward-phase) dimmer. Dimming performance depends on the dimmer, so please confirm compatibility before ordering. Installation should be completed by a qualified electrician in accordance with local electrical codes. Where to Use It Hallways and entryways: flank a mirror or doorway with a pair, or repeat the sconce along a wall. Bedrooms: mount a matching pair on either side of the bed or headboard wall. Living and dining rooms: frame artwork, a console or a fireplace with a slim vertical line of light. Hotel corridors and boutique hospitality: a refined, consistent wall light for guest rooms and shared spaces. Reed is rated for dry locations only and is intended for indoor use. Frequently Asked Questions What voltage does the Reed use? Universal 120-277V AC, 50/60Hz. What is the wattage? 8W maximum, with an integrated LED. Is it dimmable? Yes, at 120V on a compatible triac (forward-phase) dimmer. Please confirm compatibility with your specific dimmer. Do I need to replace bulbs? No. Reed has an integrated LED and no replaceable lamp. Is it certified? Yes. It is ETL listed (cETLus) to UL 1598 and CSA C22.2 No. 250.0, for dry locations. Can I use it in a bathroom or outdoors? Reed is rated for dry locations only. Please contact us if you are unsure whether a space qualifies. Where can I find size details? Contact us at info@candclight.com and we will confirm dimensions for your project.