THOR Taupe Resin Shower Tray - LAVABERG

The LAVABERG taupe RAL 7039 shower tray is an extra-flat mineral resin shower tray composed of 75% volcanic dolomite and 25% high-performance resin. Its textured slate-effect surface provides a refined, understated look and is easy to maintain on a daily basis. Slip-resistant, cuttable, and available in 6 exclusive colours, it adapts to all configurations — walk-in shower, installation on supports, or recessed installation. 10-year warranty. Technical specifications Composition: 75% dolomite + 25% high-performance resin Thickness: 3 cm (extra-flat) Finish: textured slate effect Slip-resistant: class C3 — DIN 51097 / PN24 — XP P 05-010 (PMR standard) Antibacterial surface and integrated acoustic insulation UV-resistant — suitable for indoor and outdoor use Repairable in case of scratches or impact (repair kit available) Can be cut by up to 4 cm in length and width Weight: 45 kg/m² Warranty: 10 years Available colours The LAVABERG is available in 6 exclusive colours: Black — RAL 9005 Anthracite — RAL 7016 Beige — RAL 1013 White — RAL 9003 Taupe — RAL 7039 Grey — RAL 7040 Installation methods The LAVABERG is compatible with 3 installation methods: Recessed — flush integration into the floor, ideal for a walk-in shower Surface-mounted — direct installation on a flat surface On adjustable supports — 1 support every 20 cm, suitable for technical floors The waste drain is included in the packaging (compartment under the pallet). Recommended sealant: elastic polyurethane only — never tile adhesive or adhesive mortar. ⚠️ Warranty and modifications The LAVABERG shower tray can be cut by up to 4 cm maximum in length and width to fit certain configurations. Any cutting or modification of the shower tray (cutting, drilling, adjustment, or alteration) voids the manufacturer's warranty. The 10-year warranty is valid only for a tray installed without modification, in accordance with the manufacturer's recommendations. No claims can be accepted after the product has been modified. 👉 Slight dimensional variations (±1%) may occur due to the natural expansion of the materials. Before installation, check that the surface is level and that the water drains properly. 💡 Receipt and storage Check the condition of the shower tray within 48 hours of delivery Store flat, on a rigid, level surface Do not leave it on the original pallet (risk of deformation due to moisture) Do not place anything on the shower tray When stacking, place rigid supports between units — maximum 3 units Store in a dry, well-ventilated area, between 10°C and 30°C Having a problem with your shower tray? Find the answer to your question here FAQ — Extra-flat mineral resin shower tray What is the composition of the LAVABERG shower tray? LAVABERG is made of 75% dolomite (volcanic mineral stone) and 25% high-performance resin, giving it greater strength than 100% acrylic shower trays. Is LAVABERG suitable for people with reduced mobility? Yes. It is certified slip-resistant to class C3 (DIN 51097) and PN24 (XP P 05-010), meeting accessibility requirements for wet surfaces. Can LAVABERG be installed outdoors? Yes, LAVABERG is UV-resistant and suitable for indoor and outdoor use (garden showers, spa areas, etc.). Why is my shower tray bulging? Mainly due to rigid bonding or a lack of an expansion joint. You must use an elastic polyurethane sealant. Can I leave my shower tray on its pallet until installation? No. It must be stored flat on a rigid surface, never on the transport pallet, to prevent flexing. Is it a manufacturing defect if the shower tray deforms? In 9 out of 10 cases, the cause is related to installation or storage, not the tray itself. Can a LAVABERG shower tray be installed on support points? Yes, with one support point every 20 cm to ensure uniform support and prevent flexing. Which sealant should be used for installation? An elastic polyurethane sealant; never use tile adhesive or cement-based adhesive mortar. Is the warranty still valid if I cut the shower tray? No. Any modification voids the manufacturer's warranty. The 10-year warranty applies only to a tray installed without modification.