xTool SafetyPro™ AP2 or AP2 Max Air Purifier with SuperCyclone
xTool SafetyPro™ AP2 & AP2 Max SafetyPro™ AP2 Laser Fume Extractor & Smoke Purifier for Desktop Laser Engravers & Cutters Compatible with P/M/S Series, F2, F2 Ultra, F2 Ultra UV, F1 Ultra, and F1 Lite The xTool SafetyPro™ AP2 is a compact laser fume extractor and laser smoke purifier designed for desktop laser engravers and cutters. Advanced filtration helps remove smoke, dust, odors, VOCs, and airborne particles generated during laser engraving and cutting. Designed for desktop laser engravers and cutters Airflow Performance: 150 m³/h Filtration System: Advanced multi-layer filtration Particle Removal Efficiency: 99.97% of particles down to 0.3 microns Cyclone Separation Technology: 36 cyclones capture large particles before reaching the filters Pre-Filter System: Washable SuperCyclone pre-filter VOC Removal Efficiency: Up to 99.99% Filter Lifespan: 100–600 hours depending on material and usage Intelligent Control: Auto On/Off synchronization with compatible xTool lasers Material-Specific Settings: Optimized filtration profiles for different materials Dimensions: 290 × 491 × 542 mm Compact footprint ideal for home workshops, makerspaces, classrooms, and small businesses SafetyPro™ AP2 Max Industrial Laser Fume Extractor & Smoke Purifier Compatible with P/M/S Series, MetalFab, F2, F2 Ultra, F2 Ultra UV, F1 Ultra, and F1 Lite The xTool SafetyPro™ AP2 Max is a high-capacity laser fume extractor and industrial laser smoke purifier engineered for industrial laser cutters and production environments. Its enhanced airflow, larger filtration system, and exclusive formaldehyde filter make it ideal for demanding laser cutting and engraving applications. Designed for industrial laser cutters and high-volume production environments Airflow Performance: 700 m³/h Filtration System: Up to 7-layer filtration Particle Removal Efficiency: 99.97% of particles down to 0.3 microns Exclusive Formaldehyde Filter: Included on AP2 Max only Cyclone Separation Technology: 72 cyclones capture large particles before reaching the filters Pre-Filter System: Washable SuperCyclone pre-filter VOC Removal Efficiency: Up to 99.99% 4× Filter Capacity: Larger filtration system for extended service life and fewer filter changes Filter Lifespan: 100–600 hours depending on material and usage Intelligent Control: Auto On/Off synchronization with compatible xTool lasers Material-Specific Settings: Optimized filtration profiles for different materials Dimensions: 662 × 452 × 845 mm Built for production shops, fabrication environments, and continuous-duty laser applications Compare AP2 vs AP2 Max SPEC AP2 $999 AP2 MAX $2349 Best For Desktop Laser Engravers & Cutters Industrial Laser Cutters & High-Volume Operations Airflow 150 m³/h 700 m³/h Filtration System Up to 6-Layer Filtration Up to 7-Layer Filtration Cyclone Separation 36 Cyclones 72 Cyclones Dust Capacity Standard Capacity 4× Higher Dust Capacity Particle Removal 99.97% @ 0.3 μm 99.97% @ 0.3 μm VOC Removal 99.99% 99.99% Odor Filtration Activated Carbon Filtration Activated Carbon + Formaldehyde Filtration Formaldehyde Filter No Yes Smoke & Odor Control Excellent Maximum Performance Heavy Dust Applications Moderate to Heavy Use Heavy Continuous Use Acrylic Engraving & Moderate Cutting High-Volume Cutting Wood Engraving & Cutting Continuous Cutting & Engraving Leather Excellent High-Volume Use Recommended Duty Cycle Intermittent to Daily Use Continuous Production Use Dimensions (in) 11.4 × 19.3 × 21.3 in 26.1 × 17.8 × 33.3 in Compatible Machines P/M/S Series, F2, F2 Ultra, F2 Ultra UV, F1 Ultra, F1 Lite P/M/S Series, MetalFab, F2, F2 Ultra, F2 Ultra UV, F1 Ultra, F1 Lite Ideal Applications Laser Engraving, Light Cutting, Acrylic, Wood, Leather High-Volume Cutting, Acrylic, Wood, Leather Why Upgrade to AP2 Max? — 4× Dust Capacity, 4.7× Airflow, Formaldehyde Filter, Built for Continuous Operation