Hoyt Concept XTS 40 CDM

The Hoyt Concept XTS 40 CDM brings Engineered Synergy to the target line, combining XTS tuning with the refined Concept riser and SCTR 2.0 cam for a highly adjustable target setup. The Hoyt Concept XTS 40 CDM retains the proven geometry of the Concept X, including its parallel-charging riser design, while refinements reduce vibration and contribute to a 5.15 lb bow weight. This geometry is designed to resist lateral loads during the shot, maintaining the shooting characteristics associated with the Concept platform. The XTS system moves tuning directly to the limb pockets, where wrench-operated adjustments can address vertical and lateral paper tears without a bow press. Its adjustment range also supports group tuning, holding-weight refinement, spine-range optimisation and repeatable return to previous tune settings. The SCTR 2.0 cam has a shorter back end and stores additional energy within the cam, creating a smoother draw cycle while retaining the wall characteristics of the SCTR system. The CDM module offers soft-to-stiff wall adjustment across its module positions, providing control over the feel at full draw. TXL limbs and WireWRX bowstrings complete the integrated system. Proven XTS Tuning System for vertical and lateral adjustment Wrench-operated tuning without pressing the bow XTS supports paper, group and holding-weight tuning SCTR 2.0 cam with smoother draw cycle CDM module offers soft-to-stiff wall adjustment Refined Concept riser reduces weight and vibration Parallel-charging riser design resists lateral loads Modular Grip System with interchangeable grip angles TXL limbs with WireWRX bowstrings Axle-to-axle (inch): 40.00 Cam Model: Hoyt - SCTR 2.0 CDM Catalogue Year: 2027 Draw Length Adjustability: Changeable Module Factory Speed (fps): 328 Handle Material: Aluminium Let-Off Max (%): 75 Let-Off Min (%): 65 Limb Material: Carbon/Fiberglass Composite Limb Model: Hoyt - TXL Mass Weight (lbs): 5.15 Mass weight (grams): 2336 Module Model: Hoyt - CDM