Victron Inverter 24/250 230V VE.Direct IEC - PIN241251110

Victron Inverter 24/250 230V VE.Direct IEC The Victron Inverter 24/250 is a compact DC to AC inverter designed for 24V battery systems, delivering 250VA of continuous 230V AC output. It is suited to off-grid installations, vehicles, boats and backup power applications where a reliable, lightweight inverter is needed for smaller AC loads. The VE.Direct port allows direct communication with compatible Victron monitoring devices and displays. Key Features 24V DC input with 230V AC output at 250VA continuous power rating. VE.Direct communication port for connection to Victron monitoring equipment such as the Color Control GX, CCGX or compatible displays. IEC AC output socket for straightforward connection to standard European and UK appliances. Pure sine wave output suitable for sensitive electronics and motor-driven loads. Compact and lightweight design at 2.6 kg, practical for space-constrained installations. Built-in protections including low battery voltage shutdown, over-temperature and overload protection. Product Overview The 24/250 sits at the entry level of Victron's VE.Direct inverter range. At 250VA, it is intended for powering smaller AC loads from a 24V battery bank: lighting circuits, small appliances, phone and laptop chargers, or instrumentation. The pure sine wave output means it is compatible with a wider range of equipment than a modified sine wave unit, including devices with switch-mode power supplies and inductive loads. The VE.Direct interface distinguishes this unit from basic inverters. It allows the inverter to be monitored and configured via Victron's GX devices or a VE.Direct to USB cable connected to a laptop running VictronConnect. This is useful on installations where system visibility matters, such as a monitored off-grid cabin or a vessel with a Victron system already in place. The IEC output connector is a standard C13-type socket, compatible with a wide range of European and UK appliance leads. At 2.6 kg, the unit is light enough to be mounted in a locker or under a seat. It is not intended for high-load applications. Installers should size the inverter to the actual continuous load, allowing headroom for startup surges from any motor-driven equipment. Technical Specifications Specification Value SKU PIN241251110 DC Input Voltage 24V AC Output Voltage 230V AC Continuous Output Power 250VA Output Waveform Pure sine wave Communication VE.Direct AC Output Connector IEC (C13-type socket) Weight 2.6 kg GTIN 8719076074311 Applications Off-grid cabins and outbuildings with a 24V battery system requiring a small AC supply. Marine installations on vessels with 24V house banks needing occasional 230V AC output. Motorhomes and campervans converted with 24V electrical systems. Backup power for small AC loads such as routers, lighting or communications equipment. Victron system integrations where VE.Direct monitoring of the inverter is required. What Is Included Victron Inverter 24/250 230V VE.Direct IEC unit Installation Notes This inverter must be connected to a 24V DC battery system. DC cable sizing and fusing should be calculated according to the continuous current draw at full load. The unit should be installed in a well-ventilated location away from flammable materials. VE.Direct accessories such as a VE.Direct cable or Bluetooth Smart dongle are sold separately. This inverter is not grid-tied and does not require G98 or G99 notification. Installation should be carried out by a competent electrician or qualified installer familiar with DC power systems and relevant wiring regulations.