106-0107 1060107 Caterpillar Throttle Knob Rotary Switch

106-0107 Caterpillar Rotary Switch OEM 1060107 Fits 320B 320C 320D Throttle Knob Parts Product Information Brand: Caterpillar Category: Sensors & Electrical Part Number: 106-0107 Part Name: Rotary Switch (Throttle Dial Knob) Alternative OEM: 1060107 / CA1060107 / 106-0107 Specs: 20 Amps / 10 Positions / Connector Connection Compatible Equipment: Caterpillar 311C, 312C, 320B, 320C, 320D, 325C, 330C, 345C Excavators; 950H, 966H, 980H Loaders; D3K, D5K Dozers Condition: 100% New Aftermarket Replacement 106-0107 1060107 Caterpillar Throttle Knob Rotary Switch (2) 106-0107 1060107 Caterpillar Throttle Knob Rotary Switch (3) 106-0107 Caterpillar Throttle Knob Rotary Switch1. 163-6795 Caterpillar STRAP-CABLE 2. 6V-5738 TRIM-EDGE BD (1-M) 3. 283-3074 Caterpillar SWITCH AS-TOGGLE (BACK-UP EPR VALVE) 4. 163-6711 Caterpillar SWITCH AS-TOGGLE (BACK-UP THROTTLE) 5. 186-4624 Caterpillar HARNESS AS-CONSOLE 120-7724 Caterpillar CONNECTOR 6. 9G-7641 Caterpillar SWITCH GP-START Y (ENGINE, KEY) 7. 163-6702 Caterpillar PANEL AS 170-9324 Caterpillar LAMP AS-INDICATOR (24-VOLT, 3-WATT) 8. 185-9208 Caterpillar KNOB AS (THROTTLE POSITION) 9. 106-0107 Caterpillar SWITCH GP-ROTARY Y (ENGINE SPEED CONTROL) 10. 170-6828 Caterpillar HARNESS AS-SWITCH (ENGINE START) 102-8802 Caterpillar KIT-RECEPTACLE (2-PIN) 102-8805 Caterpillar KIT-RECEPTACLE (6-PIN) 102-8801 Caterpillar KIT-RECEPTACLE (12-PIN) (EACH RECEPTACLE KIT INCLUDES RECPETACLE AS & WEDGE) 3S-2093 [9] STRAP-CABLE 7K-1181 Caterpillar STRAP-CABLE 8C-5064 CONDUIT-FLEXIBLE E (17.75-MM ID, SPLIT)(18-CM) 155-2255 Caterpillar KIT-CONNECTING PLUG (12-PIN) 155-2270 [2] KIT-CONNECTING PLUG (2-PIN) 155-2271 Caterpillar KIT-CONNECTING PLUG (4-PIN) 155-2274 [2] KIT-CONNECTING PLUG (6-PIN) (EACH PLUG KIT INCLUDES PLUG AS, WEDGE, & INTERFACE SEAL) 11. 119-5026 [4] SCREW-PAN HEAD (10-16X0.63-IN) 12. 3S-2093 [2] STRAP-CABLE 13. 7K-1181 Caterpillar STRAP-CABLE 1. 9W-1494 Caterpillar KIT-SERVICE METER (24-VOLT) (INCLUDES METER, FILM, CABLE STRAPS & WIRE ASSEMBLIES) 2. 9W-0335 Caterpillar LIGHTER AS-CIGAR (24-VOLT) 3. 101-2846 GUARD (10-CM) CE 4. 163-6795 [12] STRAP-CABLE 5. 163-6787 Caterpillar HARNESS AS-CAB 6. 8T-6693 [2] SCREW-MACHINE (M5X0.8X16-MM) M 7. 8T-0328 [2] WASHER-HARD (5.5X10X1-MM THK) 8. 163-6810 Caterpillar HARNESS AS-MONITOR 9. 5C-8312 [2] NUT (M4X0.7-THD) M 10. 8C-7581 [2] SCREW-MACHINE (M4X0.7X8-MM) M 11. 3S-2093 [3] STRAP-CABLE C 12. 163-6701 Caterpillar PANEL AS-CONTROL 13. 132-1829 Caterpillar ALARM GP (24-VOLT)(FAULT) Y 14. 9X-2042 Caterpillar SCREW-TRUSS HEAD (M6X1X12-MM) M 16. 7K-1181 [2] STRAP-CABLE 17. 6V-9669 [2] SCREW-MACHINE (M3X0.5X8-MM) M 18. 3C-6969 [2] NUT (M3X0.5-THD) M 19. 259-4883 Caterpillar ANTENNA AS C 20. 6V-9672 [2] SCREW-MACHINE (M4X0.7X16-MM) CM 21. 167-7023 Caterpillar BRACKET 22. 9X-2044 [2] SCREW-TRUSS HEAD (M6X1X16-MM) M 23. 251-0637 Caterpillar INSULATION C 24. 096-6166 [2] WASHER-HARD (4.5X9X1-MM THK) C Product Function & Specs: Heavy-duty 10-position rotary switch designed for the operator cabin console. Primarily functions as the engine throttle speed control dial (governor knob), sending clean electrical signals to the ECU to adjust engine RPM. Built with solid internal detents to give the operator clear tactile feedback at every speed click. Failure Symptoms: Engine RPM fails to respond or hesitates when turning the throttle dial. The control knob feels loose, spins freely without clicking, or skips speed positions. Intermittent engine speed fluctuations caused by worn internal contact points or terminal corrosion. Quick Installation Notes: Disconnect the machine’s battery isolator before starting any cabin panel work. Gently pry off the outer plastic dial knob and unscrew the lock nut securing the switch to the console. Unplug the rear wiring harness connector, plug in the new switch, and verify the locking tab clicks home. Secure the switch back in the panel, push the knob on, and test the throttle range across all 10 positions. FAQ: Q: Can this part replace OEM 106-0107? A: Yes, 100% interchangeable. The physical housing, 10-position internal design, and plug-and-play connector match the original Cat specification exactly. Q: Is this an OEM or aftermarket replacement? A: This is a high-quality aftermarket replacement rotary switch engineered for reliable cabin service. Exact factory fit at a better cost. Q: Which machines are compatible? A: Fits a wide range of Cat equipment, including 320B, 320C, and 320D excavators, 950H to 980H wheel loaders, and D3K/D5K dozers. Send us your model or engine serial number to double-check before ordering. Q: Does it come with the plastic throttle knob? A: Please contact our team before purchasing to confirm. We can supply the switch individually or package it with the matching dial knob depending on your stock needs. Q: Do you support bulk orders? A: Yes. We offer wholesale pricing for parts distributors, electrical rebuilders, and fleet repair shops. Contact us directly for bulk terms. Why Sourcing From WinsParts? We match your part numbers directly against official parts catalogs to ensure a 100% correct fit. Our large physical inventory allows us to ship orders fast, minimizing your machine downtime with dependable parts.