Standard Press PL

The Standard Press PL is designed specifically for the application of veneer or laminate coatings on MDF and chipboard panels. The PL series is typically used by small and medium-sized businesses, carpentry shops, and craftsmen. The Standard Press PL is available in three standard sizes for 2500 x 1300mm to 3500 x 1300mm, with customized dimensions available according to customer requirements. Different heating surfaces, heating systems, and control panels are available depending on the required application. The Standard Press PL can be configured with assembled heating surfaces, solid drilled steel surfaces, electrical surfaces, or assembled and milled surfaces for special applications. Heating options include water, diathermal oil, and cartridge electrical resistors. Applications: Application of veneer coatings on MDF panels Application of laminate coatings on MDF panels Application of veneer coatings on chipboard panels Application of laminate coatings on chipboard panels Standard Press PL Standard Sizes: 2500 x 1300mm 3000 x 1300mm 3500 x 1300mm Custom sizes available according to customer requirements Types of Heating Surfaces: Assembled Surfaces with Coil and Aluminum Coating Maximum working temperature: 120°C Maximum specific working pressure: 3-5 kg/cm² Coil covered with 3mm thick calibrated sheet metal Aluminum foil surface Designed for efficient heat distribution Solid Drilled Steel Surfaces Typical working temperature: 120°C Maximum specific pressure: 30 kg/cm² Manufactured from steel plates with circuit holes Surface can be coated with Mylar or Vetroteflon for temperatures above 120°C Electrical Surfaces Chipboard base Aluminum plate containing electrical resistors Maximum working temperature: 120°C Anodized surface available on request for greater wear resistance Assembled and Milled Surfaces: For special applications: Maximum working temperature: 120°C Maximum specific working pressure: 5-10 kg/cm² CNC milled to a standard roughness of 1.6 microns Coil covered on both sides with 8mm thick Nail-welded construction Aluminum foil or stainless steel surface Heating Systems: Water Boiler Heating Fluid: Water Maximum Fluid Temperature: 85°C Heating Time: 40 minutes Protection: Insulation Hoses: Flexible rubber Electric boiler Water recirculation pump Piping and insulation to reduce heat loss Oil Boiler Heating Fluid: Diathermal oil, viscosity 32 cSt Standard Maximum Oil Temperature: 120°C Warm-Up Time: 50 minutes Protection: Nets around boiler and pipes Hoses: Stainless steel Electric boiler Oil recirculation pump Pipes and insulation to reduce heat loss Cartridge Electrical Resistors: Cartridge electrical resistance heating system Control Panel: The Standard Press PL can be configured with: Standard control panel with pressure gauge Digital touchscreen Logic Control panel Optional Equipment: Customized work surface size Customized thrust pressure Customized cylinder stroke Intermediate surfaces for multi-daylight pressing Parallelism control Electrical cylinder exclusion with parallelism control Manual cylinder exclusion Power disconnector Special temperatures of 150°C, 180°C, 200°C, 250°C and above Differentiated temperatures on the work surfaces Heat exchanger Increased 5mm sheet thickness on assembled surfaces for specific applications Rectified and/or chrome-plated solid surfaces Different closing and opening speeds Industrial 4.0 system for interconnection with company computer systems Upper movable work surface Special software for adjusting temperature curves and downloading data to a PC Configuration without heating Transducers for setting opening, closing, and slowing of the work surfaces Sensors for adjusting work surface height Special voltages Non-EU regulations Customizable maximum temperature The Standard Press PL complies with the EC 2006/42/EC Machinery Directive.