Frigidaire Range Surface Burner Spark Electrode 318148700, Fixes Burner Not Igniting

GENUINE OEM REPLACEMENT PART 318148700 Frigidaire Spark Electrode for Ranges and Cooktops, Fixes Weak or Missing Burner Spark Genuine Electrolux/Frigidaire surface-burner spark electrode with ceramic insulator and mounting grommet for select gas ranges and cooktops. Part 318148700 Surface-Burner Spark Electrode Frigidaire / Electrolux Gas Range Genuine OEM 318148700 Frigidaire Spark Electrode for Ranges and Cooktops, Fixes Weak or Missing Burner Spark 🇺🇸 Matching U.S. Part Number: 318148700 318148700 is a genuine Electrolux/Frigidaire surface-burner spark electrode used on select gas ranges and cooktops. The electrode receives high voltage from the ignition system and creates the spark that lights the top surface burner. It includes a ceramic insulator and mounting grommet and is also described as a top-burner ignitor with grommet. This is a surface-burner electrode and should not be confused with the oven bake ignitor or the multi-output spark module. No verified OEM predecessor number has been confirmed for this part. Is This the Right Part? Part Number318148700 Verified PredecessorsNone confirmed ManufacturerElectrolux / Frigidaire Appliance TypeGas Range / Cooktop Part TypeSurface-Burner Spark Electrode IncludesCeramic insulator and mounting grommet Confirm the complete appliance model, burner position and original connector type before ordering. Similar electrodes may differ in length, terminal configuration or mounting method. Common Symptoms One surface burner producing no spark Weak or intermittent spark at a single burner Burner clicking without igniting the gas Spark jumping in the wrong direction or away from the burner Visible crack in the ceramic insulator Corroded or damaged electrode tip Check Before Replacing Inspect the ceramic insulator for cracks — a cracked insulator causes the spark to short to ground rather than jump to the burner Check for moisture or food residue on the burner cap and electrode — drying and cleaning often resolves clicking without ignition Confirm the burner cap is correctly seated — a misaligned cap changes the spark gap and can prevent ignition Inspect the ignition wire, terminal connection, burner switch, grounding and spark module before concluding the electrode is defective Pro Tip: A single-burner ignition fault is more likely caused by a cracked electrode, moisture, food debris or a misaligned burner cap than by the spark module. The spark module typically affects multiple burners when it fails. Diagnose the electrode, wiring and burner assembly at the affected position before ordering a replacement module. Part Details Part TypeSurface-Burner Spark Electrode Primary FunctionCreates ignition spark at the top surface burner Key FeatureCeramic insulator and mounting grommet included; confirm burner position and connector ConditionGenuine OEM — New Installation Notes Disconnect electrical power and shut off the gas supply before servicing the ignition system. Photograph the electrode position, wiring routing and terminal connection before removal. Compare the new electrode with the original — confirm length, ceramic profile and terminal type before installation. Inspect the ignition wire, burner cap, burner ports and spark module during the repair. Restore power and test burner ignition at all positions after installation. Gas-appliance repairs should be completed by a qualified technician where required by local code. Verified Compatible Models CPDF4085KF2, FGC30S8HBA Fitment reminder: Match the complete model number, including suffixes and revision digits, before ordering. Confirm the burner position and connector configuration. ✓ Model-Specific Repair Pages Frigidaire FGC30S8HBA Ranges Parts & Repair Guide Frigidaire CPDF4085KF2 Ranges Parts & Repair Guide