Westcott Designs Fox TRD Pro Lift Kit | '19 - '20 4Runner
Westcott Designs preload collar lift kit for Toyota factory Fox TRD PRO equipped: 4Runner, Tacoma, and Tundra. This is NOT a spacer lift, this kit retains your factory ride quality, factory suspension geometry, you can still align it to factory specs and does not effect your suspension travel. After install your truck or SUV will sit level front to rear. This kit includes everything you will need, NO replacement Upper Control Arm (UCA) needed and you can run up to a 33” tire with out a body mount chop (BMC). SAEJ2492 Warning: By installing this product, you acknowledge that the suspension of this vehicle has been modified. As a result, this vehicle may handle differently than that of factory-equipped vehicles. As with any vehicle, extreme care must be used to prevent loss of control or roll-over during sharp turns or abrupt maneuvers. Always wear seat belts, and drive safely, recognizing that reduced speeds and specialized driving techniques may be required. Failure to drive this vehicle safely may result in serious injury or death. Do not drive this vehicle unless you are familiar with its unique handling characteristics and are confident of your ability to maintain control under all driving conditions. Some modifications (and combinations of modifications) are not recommended and may not be permitted in your state. Consult your owner’s manual, the instructions accompanying this product, and state laws before undertaking these modifications. You are responsible for the legality and safety of the vehicle you modify using these components. Please read Instructions thoroughly and completely before beginning installation. Installation by a certified mechanic is recommended. Westcott Designs & Trail Grid Pro are NOT responsible for any damage or failure resulting from improper installation. Westcott Designs TRD Pro Lift Kit Installation Product Specs WHAT'S INCLUDED Lower Strut Collar: 2X (One Pair) Westcott Designs lower collars (Front) Spacers: 2x (One Pair) Westcott Designs front strut shims. Shackles: 4x (Two Pair) rear shackles and lift blocks. HARDWARE: Complete Pack (Stainless Steel) COMPATIBILITY 4Runner (2019-2020): 1.5” (front lift) 1.25″ (rear lift) Tacoma (2017-2019): 1.5” (front lift) 1.0″ (rear lift) Tundra (2018-2021): 1.5” (front lift) 1.0″ (rear lift)