Oilstone

Oil Stone – For 3D Welding Table Maintenance This oil stone is a practical tool for keeping your 3D welding table surface clean and smooth. It helps remove welding splatter, light rust, and burrs from the table surface and positioning holes, making daily maintenance quick and easy. Features Durable abrasive – Made from quality silicon carbide or corundum. Holds up well under regular use. Flat surface – Ground flat on both sides for consistent contact with the table top. Multiple grits – Available in coarse, medium, and fine grades for different tasks from heavy cleaning to light finishing. Oil or water compatible – Can be used with a little oil or water to reduce dust and improve results. Common Uses Removing weld spatter from table surfaces Cleaning burrs around locating holes and slots Light rust removal on clamps and pins General surface touch-up before welding Specifications Model Size (mm) Grit Material Best for OS-150C 150 × 50 × 25 Coarse (80#) Silicon Carbide Heavy cleaning, weld splatter removal OS-150M 150 × 50 × 25 Medium (240#) White Corundum General maintenance, burr removal OS-150F 150 × 50 × 25 Fine (600#) White Corundum Light finishing, surface smoothing Usage Tip Apply a small amount of oil or water before use. This helps reduce dust and keeps the stone working longer. For best results, start with coarse grit for heavy cleaning, then switch to medium or fine for a smoother finish. Custom sizes and grits available upon request. Contact us for more information.