Phoenix Contact TC-EXTENDER-2001-ETH-2S 2702409 Ethernet Extender

Phoenix Contact TC-EXTENDER-2001-ETH-2S 2702409 Ethernet Extender Product Basic Information: Manufacturer: Phoenix Contact Catalog number: 2702409 Model number: TC-EXTENDER-2001-ETH-2S Non-hyphenated part number: TCEXTENDER2001ETH2S Product family/series: TC EXTENDER / Ethernet extender Product type: Industrial Ethernet extender / SHDSL modem Network type: Ethernet over SHDSL Country of origin: Germany Technical Specifications: Product series: TC EXTENDER 2001 Item number: 2702409 Product function: Ethernet extender for broadband Ethernet over existing in-house copper cables Supported network structures: Point-to-point, line, and ring structures Maximum transmission distance: Up to 20 km, cable and data-rate dependent Ethernet interface: 1 x RJ45 Ethernet port Ethernet standard: 10/100Base-T(X) according to IEEE 802.3 Ethernet speed: 10/100 Mbps, auto negotiation Ethernet cable length: Less than 100 m using shielded twisted pair SHDSL interface: 2 SHDSL ports SHDSL standard: ITU-T G.991.2.bis SHDSL connection: 2 x 2-position COMBICON plug-in screw terminal blocks 2-wire data rate: 32 kbps to 15.3 Mbps 4-wire data rate: 64 kbps to 30 Mbps Supported protocols: Protocol-transparent Ethernet communication Supported IP protocols: TCP/IP, IPv4, and IPv6 Compatible industrial protocols: PROFINET, EtherNet/IP, Modbus/TCP, EtherCAT, PROFIsafe, KNX, and BACnet/IP Supply voltage range: 18 to 30 VDC Nominal supply voltage: 24 VDC Typical current consumption: Less than 180 mA at 24 VDC Maximum power dissipation: 4.32 W Digital outputs: 2 configurable digital outputs Digital output voltage: 18 to 30 VDC, dependent on operating voltage Digital output current: Up to 150 mA, short-circuit-proof Diagnostics: LED indicators and mini-USB diagnostic interface USB interface: Mini-USB type B, USB 2.0 Supply connection: COMBICON plug-in screw terminal block Mounting type: DIN rail mount Degree of protection: IP20 Product Features: Supports point-to-point, line, and ring network structures Provides distances up to 20 km depending on cable quality and data rate Supports up to 15.3 Mbps in 2-wire operation Supports up to 30 Mbps in 4-wire operation One RJ45 Ethernet port for LAN connection Two SHDSL ports for copper-line extension and redundant or line/ring structures Two configurable digital outputs for alarm or external controller signaling LED status indicators for supply, Ethernet activity, errors, diagnostics, and DSL link/status Mini-USB interface for configuration and diagnostics Product Designed Use: Designed for extending industrial Ethernet networks over existing in-house copper wiring Used in control panels, factory automation systems, building automation, remote equipment networks, and industrial communication cabinets Suitable for applications requiring long-distance Ethernet communication where standard copper Ethernet cable length is not sufficient Used where Ethernet communication must be transmitted over 2-wire or 4-wire copper cable runs COUNTRY OF ORIGIN INFORMATION IS INCLUDED WHERE AVAILABLE. * Buyer is responsible for all customs duties, tariffs, brokerage fees, local levies, taxes, and VAT (if applicable).* KJ CONTROLS LTD IS NOT AN AUTHORIZED DISTRIBUTOR FOR PHOENIX CONTACT THE ORIGINAL MANUFACTURER'S WARRANTY DOES NOT APPLY (6C5 - Upstairs Warehouse)