Memmert ICO150 CO₂ Incubator Stack

Memmert ICO150 CO₂ Incubator Stack The Memmert ICO150 CO₂ Incubator Stack includes two Memmert ICO150 CO₂ incubators in a stacked configuration, providing high-capacity incubation for cell culture, tissue culture, microbiology, pharmaceutical, biotechnology, and clinical research laboratories. Each ICO150 chamber offers independent temperature, CO₂, and humidity control, allowing laboratories to run separate incubation workflows while conserving valuable floor space. This refurbished Memmert ICO150 stack from American Instrument Exchange provides a cost-effective alternative to new equipment while supporting the stable environmental conditions required for sensitive biological samples. Memmert ICO150 CO₂ Incubator Stack Key Features Stack of two Memmert ICO150 CO₂ incubators 156 L / 5.5 cu. ft. chamber volume per incubator 312 L / 11.0 cu. ft. total capacity across both chambers Temperature range from 5°C above ambient to 50°C Setting temperature range from +18°C to +50°C CO₂ control range from 0 to 20% Dual beam NDIR CO₂ sensor system Active humidity control capability Stainless steel interior chamber Heated inner glass door 180°C sterilization program TwinDISPLAY touchscreen control system Independently controlled upper and lower incubator chambers Refurbished and tested by American Instrument Exchange 90-day warranty included from American Instrument Exchange Memmert ICO150 CO₂ Incubator Stack Key Overview The Memmert ICO150 is designed for laboratories that require precise and stable incubation conditions for cell culture and other sensitive biological applications. Each chamber uses electronic CO₂ control with a dual beam NDIR sensor system, barometric pressure compensation, and an auto-diagnostic system to help maintain reliable gas control. The stainless steel interior, heated inner glass door, and 180°C sterilization cycle are designed to support clean operation and reduce contamination risk. In a stacked configuration, two ICO150 incubators provide expanded incubation capacity while allowing researchers to separate projects, cell lines, sample types, or workflow conditions between chambers. Common Applications for the Memmert ICO150 CO₂ Incubator Stack The Memmert ICO150 CO₂ Incubator Stack is commonly used for mammalian cell culture, tissue culture, stem cell research, microbiology, assay development, pharmaceutical research, biotechnology workflows, quality control testing, and academic research. The dual-chamber stack is especially useful for laboratories that need additional CO₂ incubation capacity but want to preserve floor space. Independent chamber control allows users to operate separate incubation environments for different protocols or sample groups. Ideal Lab Types for the Memmert ICO150 CO₂ Incubator Stack This stacked CO₂ incubator system is well suited for biotechnology companies, pharmaceutical laboratories, university research labs, clinical research facilities, cell biology groups, tissue culture labs, contract research organizations, and laboratories expanding their cell culture capacity. Facilities already using biosafety cabinets, centrifuges, laboratory refrigerators, and laboratory freezers may benefit from adding a stacked CO₂ incubator system to support broader cell culture workflows. Memmert ICO150 CO₂ Incubator Stack Key Specifications Specification Details Manufacturer Memmert Model ICO150 Configuration Stack of two CO₂ incubators Chamber Volume 156 L / 5.5 cu. ft. per chamber Total Stack Capacity 312 L / 11.0 cu. ft. Temperature Range 5°C above ambient to +50°C Temperature Setting Range +18°C to +50°C Temperature Setting Accuracy 0.1°C Temperature Variation ±0.3°C at 37°C CO₂ Range 0 to 20% CO₂ Setting Accuracy 0.1% CO₂ Control Digital electronic CO₂ control with dual beam NDIR system Humidity Range Up to 93% RH with water dish; active humidity control option may support 40–97% RH Sterilization Program 180°C for 60 minutes Interior Material Stainless steel, material 1.4301 / ASTM 304 Interior Dimensions per Chamber Approx. 22" W x 27.6" H x 15.7" D Exterior Dimensions per Unit Approx. 28.3" W x 42.1" H x 23.3" D Maximum Number of Shelves 10 per chamber Maximum Chamber Load Approx. 264 lbs per chamber Maximum Shelf Load Approx. 33 lbs per shelf Electrical Requirements 115V, 50/60 Hz or 230V, 50/60 Hz depending on unit configuration Weight Approx. 199 lbs per incubator before stack hardware Specifications compiled from Memmert manufacturer literature, Memmert USA technical references, distributor technical references, and American Instrument Exchange product information. Refurbishment and Testing Process At American Instrument Exchange, each refurbished CO₂ incubator is inspected and evaluated by our technicians prior to shipment. Testing procedures may include temperature control verification, CO₂ control evaluation, display and control panel testing, door gasket inspection, interior condition review, sensor response checks, and general operational testing. For stacked systems, both upper and lower chambers are evaluated so customers can confirm independent operation before installation. Components showing excessive wear are addressed as needed, and each unit is cleaned and prepared for shipment. Shipping and Installation Considerations The Memmert ICO150 CO₂ Incubator Stack should be installed in a suitable laboratory space with adequate clearance, stable flooring, proper electrical service, and access to the required CO₂ supply. Because this listing includes two stacked incubators, buyers should confirm ceiling height, doorway clearance, elevator access, and final placement requirements before purchase. The incubators should be transported upright and handled carefully to protect the control systems, doors, sensors, and stainless steel chambers during delivery and installation. Related Laboratory Equipment Laboratories purchasing a Memmert ICO150 CO₂ Incubator Stack may also require biosafety cabinets, centrifuges, laboratory refrigerators, freezers, water baths, and microscopes. American Instrument Exchange offers a wide selection of refurbished laboratory equipment to support cell culture, sample preparation, cold storage, and research workflows. Memmert ICO150 CO₂ Incubator Stack Frequently Asked Questions Does this Memmert ICO150 listing include two incubators? Yes. This description is written for a stacked configuration that includes two Memmert ICO150 CO₂ incubators. Can the two chambers be controlled independently? Yes. Each ICO150 incubator operates as its own chamber, allowing users to run separate incubation conditions or workflows in the upper and lower units. What types of labs use a stacked CO₂ incubator system? Stacked CO₂ incubators are commonly used in cell culture labs, biotechnology companies, pharmaceutical research facilities, academic laboratories, and clinical research environments that need additional incubation capacity without taking up extra floor space. Does the Memmert ICO150 include a sterilization cycle? Yes. The Memmert ICO150 includes a 180°C sterilization program designed to support cleaning and contamination control. What warranty is included? This refurbished Memmert ICO150 CO₂ Incubator Stack includes a 90-day warranty from American Instrument Exchange.