World Class Water 1050LL Water Softener

World Class Water 1050LL Automatic Water Softening for Everyday Whole-Home Protection A metered domestic water softener designed to reduce hardness minerals before they can form stubborn limescale around your home. Automatic metered operation High-flow stainless steel connection hoses included Suitable for common UK domestic plumbing systems when correctly specified 24-month manufacturer warranty, subject to registration and conditions Metered Operation The electronic controller is programmed to your incoming water hardness and manages regeneration automatically. Whole-Home Protection Helps reduce scale formation on showers, taps and surfaces while protecting plumbing and water-using appliances. Installation Components Supplied with high-flow stainless steel hoses plus drain and overflow hose components for installation. Manufacturer Warranty World Class Water provides a 24-month warranty for manufacturing faults, subject to registration and warranty terms. Hard Water Protection Reduce Limescale at the Source Hard water contains dissolved calcium and magnesium. A salt-based softener removes these hardness minerals before the water circulates around the home, helping prevent new scale deposits from forming. Helps keep shower screens, taps and tiles cleaner Reduces scale reaching boilers and hot-water equipment Helps protect washing machines, dishwashers and kettles Allows soaps and detergents to work more effectively Automatic Control Set the Water Hardness, Then Let the Controller Manage Regeneration The World Class Water controller allows the installer to set the time, regeneration time and incoming water hardness. The display then shows the current time and the volume of softened water remaining. MeteredAutomatic softener control 2amDefault regeneration time 300 PPMDefault hardness setting 7 DaysRecommended regeneration override setting Designed Around Your Water Supply The incoming hardness setting should be adjusted to match the local water supply rather than simply left at the factory default. For accurate setup, check your local water hardness or test the incoming mains before commissioning the softener. What's Included Core Installation Components Supplied The manufacturer's installation guide lists the main connection components supplied with the softener. Site-specific plumbing fittings may still be required. World Class Water metered cold-water softener Salt lid 2 × high-flow stainless steel hoses Drain hose Half-inch overflow hose Outlet hose mesh washer insert Important installation note: The manufacturer's guide states that a bypass should be fitted and supplied by the installer. An air-gap fitting is also not supplied with the softener. Installation Planning Suitable for Common UK Domestic Plumbing Systems World Class Water's installation guidance covers mains-pressure systems, combination boilers, unvented hot-water cylinders and gravity-fed systems. Correct positioning and hose selection are important for maintaining reliable flow. Mains Pressure Typically installed on the incoming mains after the internal stop valve, with an untreated drinking-water take-off fitted before the softener where required. Combination Boilers The guidance recommends large-bore braided hoses to help preserve the flow rates required by combination boiler systems. Unvented Cylinders The softener can be installed upstream of an unvented cylinder, with suitable large-bore connections used to support mains-pressure flow. Gravity-Fed Systems Installation is also possible on older systems incorporating a cold-water storage tank, subject to the property's plumbing arrangement. Before Installation Key Installation Requirements 1.5 barMinimum incoming pressure stated in the guide PRVManufacturer guidance calls for pressure reduction where site pressure is over 3 bar 5–40°CRecommended ambient installation temperature range IndoorsInstall in a dry, frost-free location on a solid level floor Domestic softeners require suitable drainage, overflow provision, backflow protection and access for salt filling and servicing. Installation must comply with applicable UK Water Fittings Regulations. Product Details World Class Water 1050LL Specifications & Requirements Product type Metered domestic cold-water softener Operation Electronic automatic regeneration Minimum incoming pressure 1.5 bar Pressure reduction Manufacturer installation guidance requires a pressure reducing valve where site pressure exceeds 3 bar Installation environment Indoor, dry and frost-free Ambient temperature 5°C to 40°C Maximum incoming water temperature 30°C Salt type Tablet or pebble salt Included hoses 2 × high-flow stainless steel hoses Bypass Installer supplied Warranty 24 months for manufacturing faults, subject to manufacturer terms and registration Installation and Operation Official World Class Water Softener Installation Guide View the manufacturer's guide covering installation requirements, plumbing layouts, controller setup, salt use, commissioning, warranty terms and registration. Installation guidanceController programmingPlumbing requirementsWarranty and registration View Handbook → Common Questions World Class Water 1050LL FAQs Is the World Class Water 1050LL automatic? Yes. It is a metered softener with an electronic controller. The installer programs the time, regeneration time and incoming water hardness during commissioning. What salt should I use? World Class Water specifies tablet or pebble salt. The manufacturer recommends checking the salt regularly and keeping the level above the water in the cabinet. Can it be installed with a combi boiler? Yes. The manufacturer's installation guide includes specific guidance for combination boiler systems and recommends large-bore braided hoses to help maintain good flow. Can it be used with an unvented hot-water cylinder? Yes. World Class Water states that an unvented system can be supplied through a softener installed on the incoming mains, with the softener positioned upstream of the cylinder and associated controls. Does it come with a bypass? No. The installation guide states that the bypass should be fitted and supplied by the installer. What incoming pressure does it require? The manufacturer states a minimum site pressure of 1.5 bar. Its installation guidance also calls for a pressure reducing valve where site pressure exceeds 3 bar. Does the softener need electricity? Yes. The installation diagram specifies a nearby 13A electrical supply for the electronic controller. How do I protect the warranty? Follow the manufacturer's installation requirements and complete the softener registration within 21 days of purchase. The handbook lists additional warranty conditions and exclusions. Compare the Range Need a Water Softener for a Larger Household? The World Class Water 1650 is the larger-capacity model in the range, designed for households with higher daily water demand. World Class Water 1650 Larger 16-litre model for households of 5+ people → View All Water Softeners Compare the complete Regal Flow water softener range → Need Help Choosing the Right Water Softener? Not sure whether the World Class Water 1050LL is the right softener for your home? Our technical team can help you assess your water hardness, plumbing system and installation requirements before you order. Contact Support Team Email Support info@regalflow.co.uk → Telephone 0121 630 1130 → WhatsApp Message our technical team →