3fulgear Lanshan 1 Pro 20D SilNylon 3 Season - Green Hiking Pole Tent

FEATURES Updated from Lanshan 1, dedicated to all kinds of complex and the most demanding terrains and wilderness. This solid single wall tent built for any ultralight trail missions where every ounce of weight and inch of space count. Requires 1 trekking pole (120-125cmcm) for set up. Tent body is super tear resistance SilNylon - cannot be destroyed by storms, no case for now - with 2000mm waterproof. 1 door, 1 vestibule and 1 side triangular inner space for gear storage. Incredibly low all-in weight of just 840g/1.85lb. Structure: 1 Layer wall Pyramid tent Seams: Needs Seam seal by silicone glue Fabric weight: 38g(m²) 1.15oz(yr²) Fabric tear resistance: 40-45N Tie point: 9 stake, 3 reinforcement guy-line point, 1 top hanging point Zipper&Buckle: YKK, Duraflex Ultralight tent body: 690g Super strong reinforcement: UHMWPE patch SPECS FLY MATERIALS 20D Sil/Sil SilNylon or SilPoly INNER MATERIALS 15D Nylon(4-season) 20D Nylon Mesh(3-season) BATH TUBE FLOOR MATERIALS 20D PU Nylon with waterproof 6000mm BATH TUBE FLOOR HEIGHT 11cm / 4.33" WEIGHT 688g / 24.26oz (3-season) 681g/24.02oz(4-season) ACC WEIGHT Stakes+sack-100g, Guyline-11g, compression sack-44g TRAIL WEIGHT 826g / 29.14oz(3-season) 819g / 28.9oz(4-season) DIMENSION 270×110×125cm / 106"(L)×43"(W)×49"(H) CAPACITY 1 Person PACKED DIMENSION 34cm*15cm / 13.4"×5.9" SilNylon or SilPoly The Lanshan 1 Pro Gen2 is available in two fabric options: SilNylon and SilPoly. The former offers exceptional strength, while the latter has a much lower water absorption rate. In tear resistance, these materials provide 45 N (SilNylon) and 18 N (SilPoly), respectively—SilPoly is sufficient for general camping conditions, while SilNylon is better suited for extreme weather. Because SilPoly’s water absorption rate is only 0.5%—one-tenth that of SilNylon—and it does not sag when wet, many people prefer this material. Please choose the fabric that best fits your actual needs. “T“ zipper door The Lanshan 1 Pro ultralight tent features doors that can be fully opened, thanks to three high-quality YKK zippers. For a solo tent, this feature is highly popular—it allows you to enter the tent with ease, regardless of the terrain, and choose any door-opening orientation that suits your needs. Double Side Silicone Fabric Unlike most tents where one side of SilNylon/SilPoly is coated with a PU/PE layer, the SilNylon/SilPoly(to be released later) used in the Lanshan Pro series is silicone-treated on both sides. As a result, it cannot be laminated with other coatings, nor can factory-applied waterproof tape be used on the seams. This approach maximizes the fabric’s tear resistance, ensuring the tent can withstand even severe storms. This type of fabric is challenging to work with, which is why large factories typically avoid orders involving it, and only niche brands use it. At 3FULGEAR, our sewing team has years of experience handling this slippery fabric, allowing us to expertly manage the difficulties it presents during the sewing process. Due to the slippery nature of this fabric and its tendency to attract dust, we will not use this material for tent floors. Quality We can proudly say that the craftsmanship of 3FULGEAR’s sewing workshop ranks among the best in Asia. This is thanks to our low employee turnover, as we provide competitive salaries and benefits. Every one of our workers is an “expert” in sewing Lanshan tents. Our most experienced worker has been with us since 2008, the year we founded 3FULGEAR. Condensation Guard In the Lanshan Gen2, we have added a highly practical feature. We found that the head and foot areas of a sleeping bag are particularly susceptible to condensation, so we placed a solid nylon condensation guard at both ends of the tent. This helps reduce the impact of condensation on your sleeping bag to some extent. If you think this feature is unnecessary, you can cut off these two pieces of fabric, which will reduce the weight by about 20 grams.