**DISCOUNTED** 1979-1993 4-Lug Front Brake Kit with 13" Rotors - Stock Spindle (modification kit available) (Copy)

While supplies last BLEMISHED ROTORS* These rotors have cosmetic blemishes that does not affect performance. Most, if not all, will be hidden behind your wheels. Blemishes could include: Slight, small dents and dings from handling Dull zinc coating Our complete foxbody Cobra 4-lug 13" brake kit, designed to be used with your stock 1987-93 V8 spindles. With this kit you get Cobra brakes that you can use with your 4-lug 17" wheels, or earlier 4-lug wheels designed for a fox, or if you are not looking to change over to SN95 spindles. Kit includes: Cobra calipers Dual 1.5" pistons & NEW anodized aluminum bodies Cobra anchor brackets Brake pads 13" slotted, drilled and zinc plated rotors* Braided brake hoses Aluminum hubs 4-lug, races and studs installed Bearings Need to modify your spindles? We have you covered with our 1987-93 Foxbody Mustang Spindle Modification Kit. New revised kit that will allow you to modify your own spindles. Includes: (x2) 5/16-18 x .750 bolts (x2) Alignment bushings for 5/16-18 x .750 bolts (x1) 27/64 Cobalt drill bit (x1) 1/2-13 UNC hand tap Recommended supplementary items: Appropriately sized tap wrench Appropriate corded or cordless drill Appropriate cutting fluid Corded or cordless reciprocating saw with a metal blade OR Corded or cordless angle grinder/circular saw with metal cutoff blade You might ask why did we change this popular kit? Clean, good, usable 1987-93 spindle cores are getting harder and harder to find and much more expensive. This kit was developed for the end user to modify their spindle. This does not require the spindle to be removed from the car (it can be, but not necessary). What is required? A tool to cut the spindle (factory ears will be removed) Drill and tap: recommended but not required. We sell a separate install kit (1987-93 Foxbody Mustang Spindle Modification Kit) that with all the pieces to make install easier, including a fixture/locator to drill the spindle. Look over the instructions and pictures carefully. Download Spindle Modification Kit Instructions HERE The modification is not hard to do, and someone with simple mechanical skills can do them, but we want you to be aware of what you need to do before getting the kit. Click here for our Brake Kits Foxbody Merch