Nispira 16x25x5 MERV 13 Furnace Filter, Compatible with HCF16-13 & 6670 Systems

16x25x5 MERV 13 Replacement Furnace Filter Keep your compatible heating and cooling system supplied with a properly sized replacement filter using the Nispira 16x25x5 MERV 13 furnace filter. The pleated filter media helps capture dust, pollen, pet dander, and other common airborne particles as air passes through the filter. A laminated diamond-pattern support grid helps stabilize the pleats and maintain the filter’s structure during normal HVAC system operation. For convenient shipping and storage, the filter arrives in a compact folded form. Before installation, fully unfold the filter media, position the two side panels, and secure them using the included plastic rivets. Product Specifications Specification Details Brand Nispira Product Type Replacement Furnace and HVAC Filter Nominal Size 16 × 25 × 5 inches Actual Size 15-3/4 × 24-3/4 × 4-3/8 inches MERV Rating MERV 13 Compatible References HCF16-13 and 6670 Filter Media Pleated Air Filter Media Support Structure Laminated Diamond-Pattern Grid Construction Foldable Assembly Method Side Panels Secured with Included Plastic Rivets Package Quantity 1 Replacement Filter Product Classification Aftermarket Replacement Filter OEM Status Not an OEM Product Nominal Size vs. Actual Size Please note that the nominal and actual filter dimensions are different: Nominal size: 16 × 25 × 5 inches Actual size: 15-3/4 × 24-3/4 × 4-3/8 inches Always measure your existing filter or filter compartment before ordering. Filters with the same nominal size may have different actual dimensions and may not be interchangeable. Package Includes 1 × Nispira MERV 13 replacement furnace filter Plastic rivets for securing the side panels Assembly and Installation The filter arrives folded and must be fully assembled before installation. Remove the folded filter and included plastic rivets from the package. Fully unfold and extend the pleated filter media. Position the two side panels along the filter. Secure the side panels using the included plastic rivets. Confirm that the filter is fully expanded and structurally secure. Turn off the HVAC system before removing the existing filter. Install the assembled replacement filter in the correct airflow orientation. Restart the system after confirming that the filter is properly seated. Follow your HVAC equipment manufacturer’s instructions for filter direction, access, installation, and maintenance. Filtration and Maintenance The MERV 13 pleated media helps capture common airborne particles, including: Dust Pollen Pet dander Other common airborne particles Inspect the filter regularly and replace it based on: Heating and cooling system usage Airflow conditions Environmental particle levels Visible filter buildup Equipment manufacturer recommendations Actual replacement timing varies according to the system and indoor environment. Compatibility Notice This replacement filter is designed for compatible systems using the following filter references: HCF16-13 6670 Before ordering, compare both the system or filter reference and the actual dimensions with your existing filter. Actual filter size: 15-3/4 × 24-3/4 × 4-3/8 inches Disclaimer Nispira is an independent brand. This is an aftermarket replacement furnace filter and is not manufactured by the original equipment manufacturer. Manufacturer names, trademarks, and system or filter references are used solely to identify compatibility. Nispira is not affiliated with, sponsored by, or endorsed by the respective original equipment manufacturer.