1200LM Laser Light Combo Green Rechargeable Aluminum Resistant Aluminum Alloy
1200Lumen Laser Light Combo FEATURES • LED: CREE XPL2 10W powered by rechargeable battery • Steady output and strobe of 1200 lumen, press the switch up to 3s to strobe • Operation Voltage: 2-4.2V • Robust anodized aircraft grade aluminum • IPX6 water-resistance, impact resistant and shock-resistance • When the battery power is less than 5%, it will automatically shut down (turn off the light and laser) to prevent battery damage. After automatic shutdown, such as press the power on button again to turn on the battery, indicator (red light) will be 0.2s / each time, flashing for 6 seconds to indicate a lack of power. Prohibit the power on. • When charging, the battery power indicator will be red, and when fully charged, the red indicator light will become green. SPECIFICATION Model NO — XK76 Laser types — Green Wavelength — 650nm / 520nm / 450nm Laser power — <5mW Laser Run Time — 52 hours±20% / 50 hours±20% / 50 hours±20% Laser Light Run Time — 2.2 hours±20% Light Run Time — 2.5 hours±20% Led Light — CREE LED , 1200 lumens Max. Material — Aluminum alloy Battery Type — 18500 (2000MA) lithium polymer battery(Rechargeable) Light Distance — 200 meter/656 ft at night Charging Time — 2.5 hours Standby Time — 1 year Static Power Consumption — <20uA Weight — 9.24oz Operating temperature — -20~+50℃ RECHARGEABLE BATTERY Meet two charging methods, you can switch at will according to your preference: 1. After the lack of power, directly charge the battery with the Type-C charging cable in the package, the battery must be installed inside the product, because it is to charge the battery; during the charging process, the charging indicator is red, and when it is charged, it becomes green. 2. Or buy an 18500 (2000MA) charger, the battery is charged directly on the charger. WAY TO INSTALL • This light can be mounted on standard Picatinny and Weaver rail with Screw Slot. • Choose one of the holes for the screw to get forward/backward location. • Loosen the mounting screw and push it, the rail will be extended, fix the screw into rail's groove. • Tighten the screw to finish the installation. Uninstallable Conditions: 1. No Rail 2. No Picatinny 3. No Slot 4. Clear Space less than 4.5 inch /115MM LIGHT & LASER MODES • Steady Flashlight: Press once the light button. • Strobe Flashlight: Press and hold the light button for 3s to Switch. • Steady Laser: Press once the Laser button. • Strobe Laser: Press and hold the Laser button for 3s to Switch. PACKAGE CONTENTS 1 * 1200 Lumen Laser Light 1 * Black Plastic Storage Box 1 * Type-C Cable 1 * Mounting Screw 1 * Mounting Screw 1 * Mounting Picatinny Rail 1 * Installed Wrench 1 * Mounting Wrench 1 * Zeroing Wrench 1 * 18500 (2000MA) Battery ATTENTION If your equipment does not have Picatinny Rail, package (6) and (7) (8) will help you solve this problem, just install (6) Picatinny Rail on top of your equipment and tighten it with (7) (8) screws.