High-Precision Multi-Band Active GNSS Antenna with L-Band - L1/L2/L5

This high-precision active GNSS antenna combines multi-band satellite positioning with additional L-Band reception. It supports GPS, BeiDou, GLONASS and Galileo across multiple L1/L2/L5 frequency bands, while L-Band compatibility makes it suitable for GNSS receivers that can use supported satellite-delivered correction services. Inside the compact IP67-rated housing is a quadrifilar helical antenna with RHCP (right-hand circular polarisation), designed to provide wide-angle reception including signals from satellites at lower elevation angles. An integrated 28dB low-noise amplifier boosts received signals, with RF and DC bias power both carried through the SMA-Male connector. If your GNSS receiver does not require L-Band reception, see our High-Precision Multi-Band Active GNSS Antenna - L1/L2/L5 instead. That version supports the same main GNSS constellations and uses a slimmer 27.7mm diameter housing. Features Active multi-band GNSS antenna with L-Band support Supports GPS L1/L2/L5 Supports BeiDou B1/B2a/B2b/B3i Supports GLONASS G1/G2 Supports Galileo E1/E5a/E5b Additional L-Band reception Quadrifilar helical antenna construction 28dB built-in low-noise amplifier RHCP (Right-Hand Circular Polarisation) 360° coverage SMA-Male connector with coaxial DC bias power support IP67-rated enclosure Specifications Version Q39 Antenna type Active quadrifilar helix GPS bands L1/L2/L5 BeiDou bands B1/B2a/B2b/B3i GLONASS bands G1/G2 Galileo bands E1/E5a/E5b Additional band L-Band Antenna gain 2.5dBi Amplifier gain 28dB Noise figure <2dB Polarisation RHCP (Right-Hand Circular Polarisation) Coverage 360° Output VSWR ≤2 Axial ratio ≤3dB Impedance 50Ω Operating voltage 3.0–16V DC Operating current 15mA Connector SMA-Male Dimensions 40.8 × Ø44.3mm Operating/storage temperature -40°C to +85°C Ingress protection IP67 Package Contents 1x High-Precision Multi-Band Active GNSS Antenna with L-Band