CLEARANCE | Rival J-Series Rack Mounted Leg Curl & Extension Attachment (60x60mm)

*PLEASE NOTE*: This is a clearance product and was damaged in transit. It includes minor damages and cosmetic marks. Please see the photos of the damages and marks. The rear side of the seat pads has a few marks, but the usable side is brand new. The attachment has been fully tested and is in perfect working order. Please see our Refund/Return Policy for more information. Please check the attachment is compatible with your rack before ordering Suitable for all our J-Series range, or racks with 60x60mm box section uprights, and 1-inch (26mm) front facing holes spaced up to 75mm apart. Introducing the brand new Rival J-Series Rack Mounted Leg Curl & Extension Attachment, the most space efficient solution for performing leg curls and extensions. The leg curl & extension bolts onto the frame of your rack using two quick remove hitch pins, it can be moved up and down the upright of your rack to achieve the perfect height for each exercise. The adjustable seat has 4x positions - a slight decline, flat, angled and vertical (see images for each angle) - and is adjustable with the easy to use pop-pin system. You can also adjust the height of the leg roller pad by removing and adjusting up and down the main upright, so you can find the perfect position for the exercise you're doing. There are 9x different heights to choose from which allow you to find the optimum position, no matter the user's height. You can also adjust the position of the weight sleeve, to help change the weight curve and feel of each exercise (the further the weight sleeve is along the leg curl arm the heavier the weights will feel). Leg extensions are performed seated on the attachment. Leg curls can be performed by making the seat vertical, and using the seat as a rest to lean on and perform a standing leg curl. This attachment is compatible with all racks and stands in our J-Series range, or racks with a 60mm x 60mm frame and 1-inch/26mm front facing holes spaced up to and including 75mm apart. Product Details: Padded seat and leg roller included Two rubber coated handles on the side of the seat for stability 4x Adjustable seat angles using a pop-pin system Adjustable leg roller pad heights and weight sleeve position 2x Hitch Pins included Plastic protective lining to prevent scratching on your racks upright Black Powder coat finish Suitable for 2-inch/50mm Olympic weight plates Specification: Seat Width (Widest point) - 460mm Seat Width (Narrowest point) - 310mm Seat Length - 580mm Seat Pad Thickness - 58mm Leg Roller Length - 530mm Leg Roller Diameter - 120mm Weight Plate Sleeve Length - 285mm Total Height - 680mm Total Width - 1050mm Total Depth - 600mm Depth required from front face of your upright to the wall for the leg curl to fit - 480mm Maximum Load Capacity (Combined user and plate) - 250KG Product Weight - 28KG