1 Panel Shaker Class E Fire Door 813 X 2032

1 Panel Shaker Class E Fire Door — 813 × 2032 mm The Class E MDF Shaker Fire Door offers the same contemporary shaker appearance as the standard range while providing certified 30-minute fire resistance. Manufactured using the same construction principles as our standard Class E fire doors, the shaker detailing is applied without compromising fire performance. Supplied raw and unfinished, ready for your specified finish. Available in standard 2032mm height or increased to 2400mm. Supplied as a door only, without a frame. The MDF Shaker Fire Door range is available in 1 Panel, 2 Panel and 4 Panel shaker designs. Don't need a fire rating? View the MDF Medium Duty 1 Panel Shaker Door 813 × 2032mm — the same shaker design for standard internal applications. Key Features Class E fire rated – 30-minute fire resistance Solid fire-rated core construction Clean 1 panel shaker design with recessed centre panel Supplied raw – not painted, ready for your specified finish Available in 2032mm or 2400mm height Interior use Custom sizes available on request Specifications Door Width: 813mm Door Height: 2032mm (standard) or 2400mm (variant) Fire Rating: Class E – 30 minutes Core: Solid fire-rated core with engineered timber frame Shaker detail: Applied MDF stiles and rails create the recessed shaker profile Side stiles: 140mm Top rail: 140mm Bottom rail: 200mm Panel: Recessed 3mm MDF panel Finished thickness: 46mm Finish: Unfinished ("wrought") — ready for site preparation, priming and painting Application: Interior fire door Lead Time: 14–21 days (2400mm variant: approx. 3 weeks) Construction Solid fire-rated core construction with an engineered timber frame Fire-rated internal construction throughout MDF shaker profile applied to the completed fire door — construction remains consistent with the manufacturer's standard 30-minute fire door design, so the shaker detailing does not compromise fire performance Applications Suitable where a 30-minute (Class E) fire-rated door is required under South African building regulations (SANS 10400-T), including: Apartment entrance doors and internal room doors in residential developments Fire separation walls and corridors Office and commercial interiors requiring fire separation Schools and commercial buildings Areas where a 30-minute fire barrier is specified by a fire engineer or building inspector Applications requiring SANS 1253 Class E compliance Always ensure installation complies with local fire regulations and approved fire-door hardware requirements. Custom Sizes Non-standard door sizes are available on request. For pricing and lead times, email info@doorsdirect.co.za or WhatsApp 087 012 5283. Custom doors are supplied unpainted. Certification & Fire Test Details This fire door has been independently tested and classified in accordance with South African national standards: Test Authority: FIRELAB cc, Pretoria Classification Standard: SANS 1253 (fire door sets) Test Method: SANS 10177-2 (fire resistance tests for building elements) Classification Achieved: SANS 1253 – Class E (30-Minute Fire Door Assembly) Certificate Reference: FTC 25/048 (valid until July 2030) Full Test Report: FTC 20/059 (available on request) Verified Fire Performance: Stability (R): Maintained for 30 minutes Integrity (E): Maintained for 30 minutes Insulation (I): Maintained for 30 minutes Tested Assembly: Single-leaf door (2088 x 925mm) with MGO wood composite core, mounted in a wood frame with 3 hinges. Official fire test certificate available on request for architects, fire consultants, inspectors, and insurers (FIRELAB Ref: FTC 25/048). Installation note: The Class E rating is valid only when installed as a complete assembly equivalent to the tested configuration — including a compatible wood frame and 3 hinges. Complete Your Installation This door is supplied on its own, without a frame or hardware. Please note that the Class E fire rating requires installation as a complete assembly with a compatible wood frame and 3 hinges. Complete your installation with: 813 × 2032 mm Door Frames Door Hinges (3 required) Door Handles Door Locks Frequently Asked Questions What is a Class E fire door? A Class E fire door provides 30 minutes of fire resistance. In South Africa, Class E fire doors are classified to SANS 1253 and tested to SANS 10177-2. This assembly achieved R30/E30/I30 — 30 minutes of structural stability, flame integrity, and thermal insulation. What does R30/E30/I30 mean? These are the three fire resistance criteria: Stability (R) – the door remains structurally intact for 30 minutes; Integrity (E) – no flames or hot gases pass through for 30 minutes; Insulation (I) – the unexposed face temperature remains within limits for 30 minutes. Where are Class E fire doors required? Class E fire doors are typically required for internal room doors in residential buildings, apartments, and commercial interiors where a 30-minute fire separation is specified. Requirements are governed by SANS 10400-T and your project’s fire strategy. Does the shaker detailing affect the fire rating? No. The MDF shaker profile is applied to the completed fire door, and construction remains consistent with the manufacturer's standard 30-minute fire door design, so the shaker detailing does not compromise fire performance. Is there a non-fire-rated version of this door? Yes. The MDF Medium Duty 1 Panel Shaker Door 813 × 2032mm offers the same shaker design for standard internal applications where a fire rating is not required. Is this door supplied pre-hung? No. This product is supplied as a door only, without a frame. It must be installed in a compatible wood frame with 3 hinges to achieve the certified Class E fire rating. Is the 2400mm height available? Yes. Select the 2400mm height variant on this product page. Lead time for the 2400mm variant is approximately 3 weeks. What finish options are available? This door is supplied raw and unpainted, ready for painting to your specified colour or finish. Can I get the test certificate? Yes. Certificate FTC 25/048 (FIRELAB cc, valid until July 2030) and full test report FTC 20/059 are available on request. What is the lead time? 14–21 days from order confirmation. The 2400mm variant has a lead time of approximately 3 weeks. Where can I buy the 1 Panel Shaker Class E fire door? Order online at doorsdirect.co.za with nationwide delivery across South Africa, including Johannesburg, Cape Town, Durban, Pretoria, Gqeberha, Bloemfontein, towns, rural areas and surrounding regions. How can I get help or a quote? For assistance or a quote, email info@doorsdirect.co.za or WhatsApp 087 012 5283.