Solid Brass Lift-Off Hinge | Black

Refined and considered, our Lift-Off Hinges bring quiet practicality to doors that need to come away cleanly. Made entirely from solid brass, their two-piece form allows a door to be lifted free of its frame without a single fixing removed. It is a considered solution for bathrooms and ensuites, and for commercial projects. Available in four signature Passio finishes, they pair perfectly with our full door hardware range. Includes finish-matching screws. Choosing Your Handing Our Lift-Off Hinges are supplied in left and right versions, which are not interchangeable. To determine which you require, stand on the pull side of the door (the side it opens towards you). Hinges positioned to your left require the LEFT version. Hinges positioned to your right require the RIGHT version. All hinges on a single door must be the same hand. If unsure, please contact us for assistance. Specifications Contents Disclaimer Material: Solid Brass Size (H x W): 102mm x 76mm Configuration: Two-piece lift-off (door leaf and frame leaf) Handing: Left or Right (select above) Knuckle Diameter: 12.5mm Door Thickness: Minimum 35mm (not compatible with doors under 35mm) Weight Capacity (per hinge, minimum 2 per door): 30kg 1x Lift-Off Hinge (two pieces) 8x Finish-Matching Screws Lift-Off Hinges are handed. Please confirm your handing before ordering, as door accessories are non returnable. Door Accessories (including hinges, stops, catches, snibs) are non returnable. For further information, please view our Returns & Exchange Policy here. For internal use only. Lift-Off Hinges require a clearance gap above the door so the door can be raised clear of the frame leaf. Please confirm this allowance with your installer before ordering. By regulation, Passio Interiors' door hardware (door levers, door pulls, door hardware, door accessories etc.) must be installed by a licensed tradesperson. Passio Interiors reserves the right to modify specifications or remove products from our website without prior notice. Any specifications listed are correct at the time of publication. However, we do not take responsibility for printing errors. We do not recommend drilling/cutting any holes prior to receiving the items. Please ensure you drill/cut according to the actual hardware you receive, as there may be minor discrepancies in measurements.