Bykski 360mm AIO Liquid GPU Cooler For EVGA RTX 3090/3080 FTW3 Ultra (B-FRD-EV3090FTW3-X-360)

The Bykski B-FRD-EV3090FTW3-X-360 is a sealed liquid cooling kit for EVGA RTX 3090 and 3080 FTW3 Ultra cards. The radiator, pump, tubing, and block arrive pre-assembled, pre-filled, and pre-bled. It removes the loop-building step while transferring heat from the GPU chip, memory, and power stages.The 7000 RPM pump is inline with the tubing, with nothing mounted to the card. Keeping the pump off the card eliminates motor vibration on the circuit board, lowers noise, and maintains even mounting pressure.Specifications Water Block: T2 copper, electroless nickel, 288.79 x 154.53 x 25.81 mm Radiator: 396 x 120 x 38 mm, 63 mm with fans Fans: 3 x 120 mm PWM Pump: Inline, 7000 RPM Fits: a 360 mm radiator position with 63 mm of depth, plus the card with the block on it Compatibility ONLY Compatible with: EVGA NVIDIA 3090 - GEFORCE RTX 3090 FTW3 ULTRA GAMING 24GB EVGA NVIDIA 3080 - GEFORCE RTX 3080 Ti FTW3 ULTRA GAMING 12GB EVGA NVIDIA 3080 - GEFORCE RTX 3080 FTW3 ULTRA GAMING 12GB Parts Included GPU water block with backplate: pre-assembled with radiator, inline pump, and tubing (pre-filled) Fans: 3 x 120 mm PWM Thermal pads: strips for memory and power stages Thermal paste: for GPU chip Mounting hardware: mounting screws and washers Warnings Warranty is repair or replacement. All returns are accepted within 30 days, no questions asked. An installed or used item comes back at a higher restocking fee. The loop is sealed, pre-filled and pre-bled. Do not open it, do not modify the tubing and do not attempt to top it up. Doing so can cause a leak or a pump failure. Removing the stock cooler from a passively cooled card means it can no longer run on chassis air. Do not power the card without the kit installed and the pump running. Fitting the kit means removing the stock cooler and exposing the GPU chip. Thermal pads go on the memory and the power stages; thermal paste goes on the GPU chip. The manufacturer reserves the right to alter the design to expand compatibility, so the delivered item may not match the pictured item exactly. This product is for self-installation by qualified users. Not responsible for any damage caused by or when using this product. Please use at your own risk.