ARCCAPTAIN CUT55 Pro Plasma Cutter Endurance Pack

The CUT55 Pro Endurance Pack combines the dual-voltage pilot arc plasma cutter with two additional 24-piece AG60 consumable packs. The machine delivers up to 55A on 240V and up to 35A on 120V. Its non-contact pilot arc helps start cuts on rusty, painted, dirty, or coated conductive metal. With 48 additional AG60 consumables, this package is intended for users who cut regularly and want more replacement wear parts available between orders. External Equipment Required: A clean, dry air compressor rated at least 90 PSI, 5 CFM, and 10 gallons. Bundle Highlights Full 55A Shop Power: Use 240V for full cutting output and heavier shop work. Dual-Voltage Job Flexibility: Use compatible 120V power for lighter cutting and 240V for full output. Pilot Arc Reduces Contact Starts: Begin cuts on rough surfaces without touching the torch tip to metal. Forty-Eight Extra Consumables: Two 24-piece AG60 packs provide replacement wear parts for regular cutting. More Cutting Between Orders: Keep additional torch parts available and reduce restocking interruptions. What's included? Included Item Purpose 1 × CUT55 Pro Plasma Cutter Provides up to 55A output on 240V and up to 35A on 120V. 1 × Preinstalled Air Compressor Filter Helps reduce moisture and contaminants entering the torch air supply. 1 × AG-60 Cutting Torch with Accessories Directs the plasma arc for handheld cutting with compatible AG60 wear parts. 1 × 200A Ground Clamp with DKJ 10-25 Connector Completes the electrical cutting circuit through the conductive workpiece. 1 × Gas Hose Carries compressed air from the external compressor to the cutter. 2 × Hose Clamps Secure the air hose at its connection points. 1 × 240V-to-120V Voltage Adapter Supports connection to compatible 120V power when required. 1 × Carry Strap Helps carry the 11.5 lb cutter between work areas. 1 × Operator Manual Provides setup, operating, and safety instructions for the CUT55 Pro. 1 × Dust Cover Helps keep settled dust off the stored machine. 2 × 24-Piece AG60 Consumable Packs Two 24-piece packs supply 48 replacement wear parts, reducing restocking interruptions during frequent plasma cutting. CUT55 Pro Technical Specifications Specification Product Information Model CUT55 Pro Product Type Dual-Voltage Pilot Arc Plasma Cutter with App Control Input Voltage 120V / 240V AC, Single Phase, 50/60 Hz Maximum Output 55A on 240V; 35A on 120V Output Current Range 20–55A on 240V; 20–35A on 120V Rated Input Capacity 9.4 kVA on 240V; 5.5 kVA on 120V Cutting Process Handheld Plasma Cutting with Pilot Arc Clean Cut 240V: Up to 1/2 in.; 120V: Not separately specified Maximum Severance 240V: Up to 3/4 in.; 120V: Not separately specified Arc Starting Method Non-Contact Pilot Arc Supported Materials Mild Steel, Carbon Steel, Stainless Steel, Aluminum, Copper, and Other Electrically Conductive Metals Torch / Consumables AG60 Plasma Torch and Compatible AG60 Consumables App Control Bluetooth App Control for Remote Adjustment and Machine Monitoring Trigger Modes 2T / 4T Post-Flow Time 5 Seconds Operating Air Pressure 29–72 PSI Recommended Air Supply At Least 90 PSI, 5 CFM, and a 10-Gallon Tank Duty Cycle 60% No-Load Voltage 330V Cooling System Air-Cooled with Smart Fan Control Protection Features Smart Fan Cooling and IP21S Enclosure Efficiency 85% Insulation Class Class H Dimensions 17.8 × 9.6 × 6.1 in. Weight 11.5 lb CNC Compatible No Warranty 3 Years