P3V2-69 - Punch V2 6x9 3-Way Component Kit

The family of P3 PUNCH speakers were engineered to fit and built to put you in control. Featuring a true 3-way speaker system, it delivers a precise and immersive audio experience. Three independent drivers ensure every frequency range is reproduced with exceptional clarity and accuracy. A larger cone area, precision-tuned tweeter configurations, and ultra-durable materials deliver relentless output and uncompromising reliability. Auto Fit Architecture: Everything was engineered to fit. A re-designed frame, removable motor cover, mounting holes, and speaker diameter were all engineered to ensure seamless integration into today’s modern vehicles. Our factory location mounting flanges provide a flexible yet precise alignment for drop-in integration into most factory mounting locations. Superior Flexibility: The Multi-Configuration Crossover Chassis (M.C.3) breaks down into separate units, giving you total freedom to route and wire your setup your way. Every detail has been carefully considered, from frame geometry to mounting holes and diameter all to ensure a seamless fit in most modern vehicles and to make installation as smooth and adaptable as possible. Performance Driven: Powered by our advanced VAST 2.0™ technology, the PUNCH series delivers a 25% increase in cone area, resulting in maximum output and deeper, more impactful bass. The inverted dome tweeter ensures a precise high-frequency range, so every note comes through with clarity and accuracy. Rated at 75W RMS and 150W peak, PUNCH speakers deliver the output you demand, loud, clean, and relentless. Built to Last: Every component. Every material. Chosen for strength. Built for the long haul. From reinforced polymer baskets to Santoprene™ surrounds and Nomex® spiders, every part of the PUNCH speaker is engineered to be a workhorse. No matter how hard you drive them, the class-leading construction delivers relentless performance that lasts. Speaker TypeComponent System Piezo Size (Nominal Diameter)— Tweeter Size (Nominal Diameter)3/4" (19mm) Midrange Size (Nominal Diameter)2.5" Woofer Size (Nominal Diameter)6"x9" Nominal Impedance (Ohms)4Ω Frequency Response (Hz)49Hz - 25kHz Voice Coil Diameter (in/mm)1.25" (32.5 mm) CrossoverTWEETER: • HP 9kHz @ 12dB/octave (external) • Attenuation: 0dB or -3dB (external) MIDRANGE: • BP 600Hz - 6kHz @ 6dB/octave (external) MIDRANGE BASS BLOCKER: • — WOOFER: • LP 1.2kHz @ 6dB/octave (external) Woofer Mounting Depth (No Motor Cover)2.76" (70 mm) Sensitivity (dB @ 1W/1M)89 dB Sensitivity (2.83V/1M)92 dB Fs (Hz)65 Hz Power Handling (Watts RMS)75 Watts RMS 150 Watts Peak Woofer Cutout Diameter8.41" x 5.71" (213.5 mm x 145 mm) Midrange Front-Loading Depth (Twist-Lock Adaptor)1.60" (40.6 mm) Midrange Rear-Loading Depth (Twist-Lock Adaptor)1.47" (37.3 mm) Woofer Mounting Depth (With Motor Cover)3.13" (79.4 mm) Woofer Front Side Clearance0.42" (10.6 mm) Removable Motor CoverYes Grille/Trim Ring IncludedNo Mounting HardwareYes Included in the Box(2) 3/4” 4Ω Tweeter (2) 2.5” 4Ω Speakers (2) 6”x9” 4Ω Speakers (2) FLWR Twist-Lock Adaptors (multi) (1) 2.5” Speaker Cutout Template (1) 6”x9” Speaker Cutout Template (2) Flush-Mount Tweeter Cups (2) Surface-Mounting Tweeter Cups (1) Tweeter Removal Tool (2) Passive Xover (Tweeter) (2) Passive Xover (Midrange) (2) Passive Xover (Woofer) (10) 18” Crossover Wiring Ext. (4) Self-Tapping Phillips #4x16mm (Tweeter) (12) Self-Tapping Phillips #8x32mm (Speaker) (12) Self-Tapping Phillips #8x20mm (Crossover) (6) Zip Ties 4.8 mm x 350 mm (4) 18 AWG Red/Black Speaker Wire, 205 mm (6) 18 AWG (–) Female Crimp Spade (.187”) (6) 18 AWG (+) Female Crimp Spade (.250”) (12) 18 AWG Crimp Butt Connector