Goya Brass Wall Sconce

SevernLighting Engineered for precision, the Goya Brass Wall Sconce by SevernLighting is a premium hardwired LED picture light designed to elegantly illuminate artwork, mirrors, and architectural shelving. A slim, solid-brass cylindrical profile is supported by an articulated arm and a compact 5.9″ × 2.4″ backplate. Projecting 6.5″ from the wall, it seamlessly accommodates the depth of most frames. Housed within the brass fixture, an integrated 3000K warm white LED pairs with a premium frosted diffuser to deliver a seamless, glare-free wash of light—completely free of harsh hot spots. The pivoting head offers precise directional control, putting the light exactly where your display demands it. Available in three tailored lengths—23.6″, 31.5″, and 39.4″—this sconce perfectly complements pieces ranging from 35″ to over 59″ wide. Inside the tube, an integrated 3000K warm white LED shines through a frosted diffuser for an even, glare-free band of light with no visible hot spots. The head turns up or down to place that light exactly where it is needed, and three lengths, 23.6″, 31.5″ and 39.4″, let you match the fixture to pieces from about 35″ to more than 59″ wide. DETAILS MATTER What Makes It Special 01 Solid Brass Construction The fixture body is made from solid brass rather than plated steel, giving it a reassuring weight and the rigidity to keep a long tube straight and true. Each piece is finished by hand in antique brass with a fine brushed grain, so subtle variations in tone are part of its character and no two lights look exactly alike. 02 Integrated 3000K LED A continuous LED strip runs the length of the tube behind a frosted diffuser, producing a uniform band of light without the dark gaps or bright spots of bulb-based picture lights. The 3000K color temperature renders warm tones, wood frames and skin naturally, while LEDs emit almost no UV and little heat, which makes them a gallery-safe choice for paintings, prints and photographs. 03 Adjustable Turning Head The head turns up and down by hand so you can direct the beam onto the surface below rather than into the viewer’s eyes. Turn it down to wash a canvas from top to bottom, keep it level for an even band across a mirror or shelf, or turn it up to graze the wall with a soft accent glow. It moves on a single axis, so the bar always stays parallel to the frame. 04 Designed for a Clean Installation The compact 5.9″ × 2.4″ backplate mounts onto a standard single-gang wall box and hides the wiring connection completely, with all mounting hardware included. A 6.5″ projection carries the light past the face of most frames, and the hardwired design means no visible cord running down the wall. Installation by a licensed electrician is recommended. Try It on Your Wall See how the light falls Turn the head, pick a length and switch the light on or off to see how the Severn changes a wall. Showing Small 23.6″Medium 31.5″Large 39.4″ over a 55″ painting Turning AngleUp · Level · Down Turn UpLevelTurn Down Soft Wall GlowLight washes the wall above for a calm accent in bedrooms and evening corners. Mirrors & ShelvesAn even band of light across the top of a mirror, a bookshelf or a display niche. Artwork & PrintsLight sweeps the canvas from top to bottom, not just the top edge of the frame. SizeLength of the bar Small23.6″ / 60 cm Medium31.5″ / 80 cm Large39.4″ / 100 cm Best for frames and mirrors 35–47″ wide. Best for frames and mirrors 47–63″ wide. Best for statement pieces 59″ and wider. Light is on, 3000K warm whiteLight is off Illustration only. Actual light spread depends on frame size and mounting height. ☰ Specifications Design & Material MaterialBrass FinishAntique Brass AdjustmentTilts up & down Electrical Light SourceIntegrated LED WattageS 12W · M 18W · L 24W Color Temperature3000K warm white Installation WiringHardwired MountingWall, single-gang box Backplate5.9″ × 2.4″ / 15 × 6 cm Equipped with built-in LED lighting. Dimmable options are also available upon request—please feel free to contact us for customized solutions. Dimensions Fixture Overview Same backplate and arm on all three lengths Small L 60 × W 16.5 × H 9 cm L 23.6″ × W 6.5″ × H 3.5″ Medium L 80 × W 16.5 × H 9 cm L 31.5″ × W 6.5″ × H 3.5″ Large L 100 × W 16.5 × H 9 cm L 39.4″ × W 6.5″ × H 3.5″ Backplate L 15 × H 6 cm L 5.9″ × H 2.4″ Small Medium Large Tap any drawing to view it full size. ✦ Where It Fits Best A slim brass tube that tilts, so light lands on the surface, not in your eyes. ★ Best Fit Above a Painting The 6.5″ projection carries the light out past the frame, and the tilting head lets you set the beam so it falls evenly down the canvas from top to bottom. Warm 3000K LED brings out the depth in oils, wood frames and gilded edges. This is where it looks its very best. Also Shines In Over a Vanity Mirror Soft, flattering light from the front. Above a Bookcase Light down the spines in a study. In a Hallway A warm accent over a console. Finding Your Fit Choose a light about half to two thirds the width of what hangs below. Small (23.6″) suits frames 35–47″ wide, Medium (31.5″) suits 47–63″, and Large (39.4″) suits 59″ and wider. Mount the backplate so the bar sits about 4–6″ above the top of the frame, then tilt the head to set where the light lands. Good to Know Lengths23.6″ · 31.5″ · 39.4″ Projection6.5″ from the wall LightIntegrated LED, 3000K FIXTURE DETAILS Modeled on the classic picture lights found in museums and galleries, every Severn sconce from SevernLighting is crafted from solid brass and hand-finished in antique brass, with a fine brushed grain you can see and feel. It comes in three lengths, 23.6″, 31.5″ and 39.4″, each standing 3.5″ tall with a 6.5″ projection, and is designed for hardwired wall installation. Integrated LED in 3000K warm white, so there are no bulbs to buy or change. The head tilts up and down to aim the light exactly where you want it. ? Questions & Answers Which size should I choose? Measure the width of the frame or mirror the light will sit above, then choose a light about half to two thirds of that width. Small (23.6″ / 60 cm) suits pieces 35–47″ wide, Medium (31.5″ / 80 cm) suits 47–63″, and Large (39.4″ / 100 cm) suits 59″ and wider. If you are between two sizes, the longer one gives more even light at the edges. How high above the artwork should I mount it? Most people mount the backplate so the light bar sits about 4–6″ (10–15 cm) above the top edge of the frame. This keeps the fixture clear of the frame and lets the light fall evenly down the surface. Then tilt the head to set exactly where the brightest part of the light lands. Can the head rotate left and right? No. The head tilts up and down only, which is all you need to aim light onto a flat surface such as a painting or mirror. Because it can't swing sideways, the bar always stays parallel to the frame and looks straight. Will the LED light damage my paintings? The integrated LEDs give off almost no ultraviolet light and very little heat. UV and heat are the two main causes of fading and drying in artwork, so the Severn is a safe choice for oil paintings, watercolors, prints and photographs. Is it made of real brass? Yes. The body is solid brass with a hand-applied antique brass finish. Because the finish is applied by hand, each piece has slight natural variations in tone and grain. How is it installed? The Severn is hardwired, which means it connects directly to the wiring in your wall rather than plugging into a socket. The backplate mounts onto a standard single-gang wall box, and all mounting hardware is included. We recommend installation by a licensed electrician. What does 3000K warm white mean? 3000K describes the color of the light: a soft, warm white similar to a traditional lamp. It flatters skin tones, wood and the warm colors found in most paintings, and feels far cozier than the cool white light used in offices. Can I replace the LED myself? The LED is built into the fixture, which keeps the tube slim and means there are no bulbs to change. It is designed to last for many years. If it ever needs service, contact the SevernLighting team and we will help you directly. How do I care for the brass finish? Wipe it gently with a soft, dry cloth. Avoid metal polish, abrasive pads and chemical cleaners, as these can strip the antique finish. Always switch off the power and let the fixture cool before cleaning.