2 Pack Ovonic 650mAh 11.1V 80C 3S LiPo Battery Pack with XT30 Plug for Micro FPV Drones, Toothpick Quads, and Small RC Aircraft

Overview Supercharge your micro flight builds with the Ovonic 650mAh 11.1V 80C 3S Softcase LiPo battery series. This high-performance 2-pack is engineered specifically for sub-250g micro flyers, toothpick quads, and small-scale aircraft that require an absolute minimum payload weight alongside an aggressive current delivery. Featuring a fierce 80C discharge rating, these compact 3S cells offer the lightning-fast throttle response and power retention needed to power through sharp aerial maneuvers, cinematic dives, and tight micro-track gates. Application This lightweight micro 3S softcase pack is optimized for weight-sensitive, high-drain brushless hobby platforms: Micro FPV Drones & Whoops: Designed perfectly for 2-inch to 3-inch micro brushless quads, Cinewhoops, and ultralight "Toothpick" style platforms. Micro RC Airplanes: An excellent choice for small 3D foamies, micro park flyers, and lightweight indoor electric flyers requiring an 11.1V power source. Sub-250g Regulation Builds: Helps pilots easily remain below strict weight limits while maximizing total wattage and thrust-to-weight performance. Key Features Aggressive 80C Discharge Punch: Supplies an immediate, steady current layout to high-KV micro brushless motors, keeping voltage sag at bay during full-throttle punch-outs or hard recoveries. Featherweight Profile: Weighing a mere 59 grams per pack, it reduces drag and unlocks maximum flight agility, faster roll rates, and crisp cornering capability. Ultra-Compact Footprint: Measuring only 58mm in length, it mounts easily onto slim toothpick bottom plates, micro-top decks, or small internal fuselage compartments. High-Conductivity XT30 Connector: Factory-fitted with low-resistance, lightweight XT30 power plugs and standard JST-XHR balance connectors for safe, efficient power transmission and regular balancing. Advanced Stacking Quality: Crafted using elite cell-layering structures to ensure ultra-low internal resistance and optimal thermal regulation during high-stress flight profiles. Technical Specifications Brand: Ovonic Chemistry: Lithium Polymer (LiPo) Configuration: 11.1V / 3S1P / 3 Cells Capacity: 650mAh Discharge Rate: 80C Net Weight (±5g): 59g / 0.13 lbs (per piece) Dimensions (±3mm): 58 x 31 x 17 mm / 2.28 x 1.22 x 0.67 inches (L x W x H) Connector Type: XT30 Plug Balance Connector Type: JST-XHR Shell Material: Softcase (Protective Shrink Wrap) What's in the Box 2 x Ovonic 650mAh 11.1V 80C 3S Softcase LiPo Batteries 2 x Brand Stickers 1 x User Manual Note / Warning Precision Balance Charging: Always use a high-quality micro LiPo balance charger. Never leave charging cells unattended. Voltage Safeguard: Monitor your flight metrics and avoid discharging the pack below 3.5V per cell under load to keep the internal chemistry from degrading. Storage Management: When leaving packs uncharged or unused for more than 48 hours, balance-discharge or charge them to a standard storage level of approximately 3.8V–3.85V per cell. Physical Protection: Ensure the softcase layout is safely secured away from rotating props, sharp carbon fiber frame edges, or abrasive landing surfaces during flight operations.