Victron – SmartSolar MPPT 100/30 (12/24V, Bluetooth) – SCC110030210

Smart 30A solar charging for 12V and 24V touring, caravan, marine and off-grid battery systems. The Victron SmartSolar MPPT 100/30 (SCC110030210) uses ultra-fast Maximum Power Point Tracking to pull more usable power from your solar panels, especially in changing light and partial shade. Built-in Bluetooth lets you monitor, configure and update the controller through the VictronConnect app without needing a separate display. Why it works so well in Aussie touring rigs • 30A MPPT solar charging suits medium 12V and 24V solar setups in caravans, campers, boats and 4WD canopies. • 100V PV open-circuit input gives useful headroom for properly designed panel arrays. • 12V / 24V auto-select makes it suitable for common touring and off-grid battery systems. • Built-in Bluetooth allows setup, monitoring and firmware updates through the VictronConnect app. • Advanced partial shading algorithm helps the controller find the best maximum power point when solar conditions are not perfect. • Fanless high-efficiency design with peak efficiency over 98% and full rated output up to 40°C. • Flexible charge algorithm with programmable settings and eight pre-programmed charge profiles. Why buy from us Real 12V system advice from a touring and installation-focused team Suitable support for caravan, 4WD, canopy, boat and off-grid solar setups Fast QLD dispatch from our Baringa warehouse where stock is available Local backup before and after the sale Key features • Model: SCC110030210 • Victron SmartSolar MPPT solar charge controller • 30A rated charge current • Battery voltage: 12V / 24V auto-select • Maximum PV open-circuit voltage: 100V • Nominal PV power: 440W @ 12V / 880W @ 24V • Maximum PV short-circuit current: 35A • Built-in Bluetooth for VictronConnect app monitoring and setup • VE.Direct port for wired data connection to compatible Victron GX devices, PC or other devices • Ultra-fast MPPT tracking for improved solar harvest • Advanced maximum power point detection for partial shading conditions • Multi-stage adaptive charging algorithm • Fully programmable charge settings plus eight pre-programmed profiles • Fully discharged battery recovery function • Internal temperature sensor • Optional external battery voltage and temperature sensing via compatible Victron accessories • Fanless design with maximum efficiency over 98% • 5-year Victron warranty What’s in the box • Victron SmartSolar MPPT 100/30 charge controller - SCC110030210 • Product documentation as supplied Tech specs quick • SKU / MPN: SCC110030210 • GTIN / barcode: 8719076040170 • Battery voltage: 12V / 24V auto-select • Rated charge current: 30A • Nominal PV power: 440W @ 12V / 880W @ 24V • Maximum PV open-circuit voltage: 100V • Maximum PV short-circuit current: 35A • Maximum efficiency: 98% • Self-consumption: 12V: 30mA / 24V: 20mA • Absorption charge voltage default: 14.4V / 28.8V adjustable • Float charge voltage default: 13.8V / 27.6V adjustable • Charge algorithm: Multi-stage adaptive • Temperature compensation: -16mV/°C or -32mV/°C • Protections: PV reverse polarity, output short circuit, over-temperature and PV reverse current • Operating temperature: -30°C to +60°C • Full rated output: up to 40°C • Humidity: 95% non-condensing • Data communication: Built-in Bluetooth and VE.Direct • Terminal size: 16mm² / AWG6 • IP rating: IP43 electronics / IP22 connection area • Unit size: 130 × 186 × 70 mm • Unit weight: 1.3 kg • Boxed size: 205 × 130 × 90 mm • Boxed weight: 1.52 kg • Warranty: 5 years Install note Correct solar controller selection depends on panel voltage, panel current, battery voltage and total array size. Use suitable cable sizing, fusing and isolation, and confirm your panel array stays within the controller’s voltage and short-circuit current limits before installation.