VIVOSUN - AeroWave E6 Gen2 Clip Fan

VIVOSUN AeroWave E6 Gen2 – 6” Clip-On Fan The VIVOSUN AeroWave E6 Gen2 is a quiet, powerful 6-inch clip-on grow tent fan powered by an upgraded dual ball bearing EC motor. Good air circulation is essential in any hydroponic setup. It helps prevent humidity building up between leaves, which can lead to leaf scorching (when light magnifies through water droplets) and powdery mildew. Plants also transpire at a much higher rate under full-spectrum grow lights, so adequate airflow at canopy height and underneath the canopy is essential for a healthy growing environment. Using the VIVOSUN AeroWave E6 Gen2 will help to strengthen plant stems by mimicking a natural breeze. Clip it onto your tent pole, aim it across your canopy, and let it keep your grow space consistent from root to tip. 💨 Local control straight out of the box No controller or app required — everything is adjustable using the fan's own buttons. Dual ball bearing EC motor delivers 320 CFM airflow at just 33 dB(A) 5 speed levels, with normal and natural wind modes (5 natural wind levels) 5-level auto oscillation, with 90° horizontal and 80° vertical adjustment 3 built-in local timer/cycle setting for automatic on/off circulation Automatically retracts to prevent motor jamming if it detects an obstacle 🧹 Easy to clean, built to last Front cover lifts off easily, so you can wipe down the fan blades in seconds VIVOSUN's patented clamp grips tight on round poles, square poles, or flat surfaces Thick rubber pad on the clamp stops it slipping or marking your surfaces IP54-rated to handle the heat and humidity of a grow space 🔄 Recommended Coverage Square Grow Rooms 1-2 x AeroWave E6 Gen2 → grow tents up to 1.2 × 1.2 x 2.2M (3.168m³) 2 x AeroWave E6 Gen2 → grow tents up to 2 x 2 x 2.2M (8m³) 4-6 x AeroWave E6 Gen2 → grow tents up to 3 x 3 x 2.2M (19.8m³) Rectangular Grow Rooms 1-2 x AeroWave E6 Gen2 → grow tents up to 1.5 × 0.8 × 2M (2.4 m³) 2 x AeroWave E6 Gen2 → grow tents up to 2.4 × 1.2 × 2.2M (6.336 m³) 2-4 x AeroWave E6 Gen2 → grow tents up to 3 × 1.5 × 2.2M (9.9 m³) 📐 Technical specs Model name: AeroWave E6 GEN2 Dimensions: 5.58 x 9.15 x 9.88 in. Diameter: 6" Engine: EC Maximum airflow: 320 CFM Number of auto oscillation: 5 Number of speed settings: 5 (local)/ 10 (via app/E25) Number of speed (natural breeze): 5 Timer: Yes Horizontal oscillation: 90° Vertical angle adjustment range: 80° Noise level: 33 dBA Input voltage: 100-240V AC 50/60Hz Wattage: 12W Suitable pole size: 16mm-22mm Compatible controller: E42/E42A/E25 📦 What's in the box 1 x AeroWave E6 Gen2 Fan 1 x Mounting Clip 3 x Cable ties 1 x Wire tie 1 x Power cord 1 x Instruction manual Type-C extension cable (for connecting to GrowHub Controllers) View the online instruction manual.