⦿ 8in: LOW STOCK ⦿ 12in: LOW STOCK You asked and we've listened... our industry leading Universal 3D Splitter Endplates are now offered in Carbon Fiber Reinforced Polymer at a fraction of the cost of our Dry Carbon option. Available in 8" or 12" length options to suit a wide range of vehicle applications. Racebred Components 3D Splitter Endplates were designed to help increase downforce by controlling the airflow on the outward ends and underside of the front splitter. Utilizing CFD analysis we were able to improve front-end downforce by creating a flow structure and outwash, leading to an increase in front grip. The 3D tunneled design helps create a seal at the edges of the splitter and joins the existing vortex created in the same rotation, while the flow conditioner at the rear functions to further redirect air outward past the front wheels. FEATURES: CFD Designed / Optimized Approximate 18% Downforce Increase @ 100mph* CFRP Construction (Carbon Fiber Reinforced Polymer) Textured Black Finish Universal Fitment Available in (3.5" x 8") or (5" x 12") Sizes Integrated Mounting Flange (1" x 7") or (1.2" x 11") Pre-Drilled Mounting Holes .19lbs (Per 8in Endplate) / 0.47lbs (Per 12in Endplate) WHAT’S INCLUDED: CFRP 3D Splitter Endplates (Left & Right) Black Stainless Steel Mounting Hardware Installation Guide Drilling Templates PRODUCTION TIMELINE: IN STOCK DISCLAIMER: 12in 3D Splitter Endplates require at least a 1.2” x 11" flat surface area and a straight splitter edge for installation. 8in 3D Splitter Endplates require at least a 1” x 7" flat surface area and a straight splitter edge for installation. CFRP Splitter Endplates are manufactured for motorsport use and and may contain surface imperfections or resin blemishes and are not considered a defect. *CFD analysis was simulated using a ready-state scenario. Numerical figures shown are results from in-house parameters and 12" length endplates and may differ from other models due to a number of variances involved. These simulations were used to gather and optimize overall vehicle performance, which were then track tested and validated with driver data and results. All Racebred Components products are manufactured for off-road use and are not intended for use on public streets. Unless otherwise noted, all Racebred Components products are designed to be used for the application stated and or accompanying Racebred Components parts. Due to the nature of racing, all variances in conditions and use cannot be foreseen and therefore the safety of any person associated with use of our products is out of our control and we cannot be held liable for said event or any product failures due to unforeseen events or improper use or abuse. All brackets and splitters are to be chassis mounted and cannot be bumper fastened. Depending on bumper design, splitter size, material or diffuser tunnels attachments, additional bracing with cables or rods may be required and is left to users discretion. Due to frame variances, fitment modifications or trimming may be necessary.