Viking K-1900-8-IP-EWP Vandal Resistant VoIP Phone with Auto Dialer with Keypad, Entry System and Enhanced Weather Protection

The K-1900-8-IP-EWP VoIP panel phone can either auto-dial a phone number each time the handset is lifted, be used as a multi-number auto-dialer, or be used as a standard manual dial phone. EWP products feature foam rubber gaskets and boots, sealed connections, gel-filled butt connectors, as well as urethane or thermal plastic potted circuit boards. View IP SIP System: Compatibility List K-1900-8-IP Features: Vandal Resistant Features: 12 gauge 316 stainless steel faceplate with permanent laser etched graphics Heavy duty metal keypad, hook switch, and armored cable T-10 security Torx drive mounting screws Weather Resistant Features: Marine grade 316 stainless steel faceplate and Torx security screws Internally sealed keypad Enhanced Weather Protection designed to meet IP66 Ingress Protection Rating Faceplate gasket Ring with adjustable volume and cadence Hearing aid compatible amplified handset with sealed push button volume control Two sets of SPDT 2 Amp relay contacts for door / gate or camera control Secure Remote Relay Control using Viking RC-4A SIP compliant PoE powered (class 1, <4 Watts)­­­ Outbound Proxy, Authentication ID, Peer to Peer, VLAN Tagging Network downloadable firmware 54″ armored handset cord Programmable to speed dial up to 250 numbers 26 Bit Wiegand input for adding a Viking proximity card reader 26 Bit Wiegand output can connect to card reader input of an Access Control System Cycles to rollover phone number on busy or ring-no-answer Program up to 1,000 keyless entry codes and/or proximity card numbers Keyless entry codes and proximity card numbers can be programmed to only allow access at specific times and day of week Event logging with time and date stamp Remotely programmable Extended temperature range: -40°F to 140°F Humidity - EWP Products: Up to 100% Zinc plated steel rough-in box with (2) 0.75″ conduit knockouts included Flush mount using the included rough-in box or surface mount using a Viking VE-6X7 Surface Mount Box Optional VE-LIGHT kit to illuminate the front panel at night Diagnostics (for testing relays) Specifications: Power: PoE class 2 (<6.5 Watts) Phone Dimensions: 5.0″ x 10.0″ x 4.75″ (127mm x 254mm x 121mm) Overall Dimensions: 5.0″ x 10.0″ x 5.61″ (127mm x 254mm x 143mm) Shipping Weight: 5.3 lbs (2.4 kg) Operating Temperature: -40°F to 140°F (-40°C to 60°C) Humidity: up to 100% Panel Material: 0.105″ thick stainless steel Handset Cable Length: 52″ to 57″ (132cm to 145cm) Audio Codecs: G711u, G711a, G722 Network Compliance: IEEE 802.3 af PoE, SIP 2.0 RFC3261, 100BASE-TX with auto cross over Regulatory Compliance: CE, FCC Part 15 and Canada ICES-003 Class A­­­ Connections: (1) RJ45 10/100 Base-T, (14) gel-filled butt connectors Certifications: EWP IP66 CE FCC Part 15 SIP