2024+ Harley-Davidson Fairing Speaker & Tweeter Kit | Cicada Audio
2024+ ROAD GLIDE / STREET GLIDE FAIRING AUDIO 2024+ Harley-Davidson Fairing Speaker & Tweeter Kit | Cicada Audio Build a complete high-output front fairing speaker package for a compatible 2024 or newer Harley-Davidson Road Glide or Street Glide. Each configuration combines a pair of Cicada Audio CXXM65 6.5-inch mid-bass speakers with the correct model-specific fairing grilles, horn tweeters and external crossover protection. Choose Your Configuration View Specifications Complete Front Fairing Package Choose Road Glide or Street Glide Choose 2Ω or 4Ω CXXM65 mid-bass speakers Two 6.5-inch Cicada mid-bass drivers 100 watts RMS per mid-bass speaker Kevlar mid-bass cones Neodymium speaker motors Model-specific fairing grilles Two grille-mounted horn tweeters External tweeter crossover protection Road Glide uses RR075T tweeters Street Glide uses RR05T tweeters Four total front-stage drivers Model-Specific Cicada Front Fairing Audio This Garage Bagger Stereo bundle combines dedicated Cicada Audio mid-bass drivers with the correct grille-mounted tweeter package for the selected Harley-Davidson motorcycle. The CXXM65 speakers reproduce the lower and middle portion of the front soundstage, while the grille-mounted horn tweeters add vocal detail, percussion definition and upper-frequency projection for open-air motorcycle listening. Select the motorcycle model first, then choose the CXXM65 impedance required by the amplifier and final wiring configuration. Important impedance clarification: The 2Ω or 4Ω selection changes only the CXXM65 mid-bass speaker pair. The included RR075T or RR05T tweeters remain 4Ω in every bundle configuration. Choose Your Motorcycle and Mid-Bass Impedance Road Glide / 2Ω Cicada CXXM65.2 2-ohm mid-bass speaker pair 24CHDRGGTK-075 Road Glide kidney grilles Two RR075T 4-ohm horn tweeters External tweeter crossover networks Road Glide / 4Ω Cicada CXXM65.4 4-ohm mid-bass speaker pair 24CHDRGGTK-075 Road Glide kidney grilles Two RR075T 4-ohm horn tweeters External tweeter crossover networks Street Glide / 2Ω Cicada CXXM65.2 2-ohm mid-bass speaker pair 24CHDSGGTK-05 Street Glide fairing grilles Two RR05T 4-ohm horn tweeters External tweeter crossover networks Street Glide / 4Ω Cicada CXXM65.4 4-ohm mid-bass speaker pair 24CHDSGGTK-05 Street Glide fairing grilles Two RR05T 4-ohm horn tweeters External tweeter crossover networks Choose impedance by amplifier requirements: Confirm the amplifier’s supported channel load, available power, wiring plan and crossover configuration before selecting the 2Ω or 4Ω option. Everything Included Cicada CXXM65 Mid-Bass Speaker Pair Two 6.5-inch dedicated mid-bass speakers supplied in the selected CXXM65.2 2-ohm or CXXM65.4 4-ohm configuration. Model-Specific Fairing Grilles A matched pair of Road Glide kidney grilles or Street Glide fairing grilles based on the selected motorcycle. Two Cicada Horn Tweeters Road Glide packages include RR075T tweeters. Street Glide packages include RR05T tweeters. External Tweeter Crossovers The required model-specific crossover networks are supplied with the selected grille and tweeter package. Not included: Amplifier, DSP, A2B interface, power wiring, speaker wiring, amplifier rack and other installation components are sold separately. Cicada CXXM65 6.5-Inch Mid-Bass Speakers The CXXM65 is a dedicated motorcycle mid-bass driver designed to produce strong, responsive output from a compact 6.5-inch platform. It does not contain an integrated tweeter. Pairing the CXXM65 with the model-specific Cicada horn tweeters creates a true multi-driver front soundstage with dedicated mid-bass and high-frequency reproduction. 100W RMS Per Speaker Each CXXM65 handles 100 watts RMS and 200 watts maximum. 2Ω or 4Ω Options Select CXXM65.2 or CXXM65.4 according to the amplifier and wiring requirements. Kevlar Cone The lightweight cone is engineered for rigidity, responsiveness and resistance to motorcycle operating conditions. Neodymium Motor A compact high-energy motor provides strong output without excessive speaker weight. Shallow Installation A 2.26-inch mounting depth supports space-limited motorcycle fairing installations. Dedicated Mid-Bass Design The driver is optimized to work with a separate tweeter rather than using an integrated coaxial high-frequency driver. Available Models CXXM65.2 and CXXM65.4 Speaker Size 6.5 inches Quantity Two speakers / one pair Impedance Options 2Ω or 4Ω per speaker Power Handling 100W RMS / 200W maximum per speaker Sensitivity 92 dB at 1W/1m Frequency Response 60 Hz–5 kHz Cone Material Kevlar Magnet Type Neodymium Mounting Depth 2.26 inches Speaker Type Dedicated mid-bass driver Verify mounting clearance: Confirm the factory enclosure, mounting diameter, mounting depth, speaker adapter and grille clearance before installation. Road Glide Grille and Tweeter Configuration Road Glide bundle variants include the Cicada Audio 24CHDRGGTK-075 matched kidney-grille kit with RR075T horn tweeters. Road Glide Kidney Grilles Model-specific left and right grilles provide dedicated mounting locations for the included RR075T tweeters. RR075T Horn Tweeters The 4-ohm ring-radiator tweeters add strong upper-frequency output, vocal clarity and projection. Grille Kit Cicada Audio 24CHDRGGTK-075 Tweeter Model Cicada Audio RR075T Tweeter Quantity Two / one matched pair Tweeter Impedance 4Ω per tweeter Crossover Protection Included external crossover networks Primary Application Compatible 2024+ Harley-Davidson Road Glide Road Glide only: The 24CHDRGGTK-075 kidney grilles are not interchangeable with Street Glide fairing grilles. Street Glide Grille and Tweeter Configuration Street Glide bundle variants include the Cicada Audio 24CHDSGGTK-05 matched fairing-grille kit with RR05T horn tweeters. Street Glide Fairing Grilles Model-specific left and right grilles provide integrated mounting locations for the included RR05T tweeters. RR05T Horn Tweeters The compact 4-ohm horn tweeters add high-frequency detail and projection without requiring a universal mounting solution. Grille Kit Cicada Audio 24CHDSGGTK-05 Tweeter Model Cicada Audio RR05T Tweeter Quantity Two / one matched pair Tweeter Impedance 4Ω per tweeter Crossover Protection Included external crossover networks Primary Application Compatible 2024+ Harley-Davidson Street Glide Street Glide only: The 24CHDSGGTK-05 fairing grilles are not interchangeable with Road Glide kidney grilles. Amplifier and Crossover Matching The selected CXXM65 impedance must match the amplifier’s supported channel load and intended wiring configuration. The horn tweeters use their own included crossover networks and should not receive full-range unfiltered amplifier output. Use the included crossover network for each tweeter. Do not connect the tweeters directly to an unfiltered amplifier channel. Confirm whether the amplifier supports the selected 2Ω or 4Ω mid-bass load. Set mid-bass high-pass and low-pass filtering for the completed system. Set amplifier gain using measured clean output. Confirm left and right speaker polarity before reinstalling the fairing. Do not use amplifier gain controls as volume controls. Balance the horn tweeters with the CXXM65 mid-bass speakers during tuning. Professional tuning recommended: Proper gain, crossover and output-level setup are essential for speaker protection, tonal balance and long-term reliability. Complete Bundle Specifications Product Type Model-specific fairing component speaker kit Motorcycle Options 2024+ Road Glide or 2024+ Street Glide Mid-Bass Speaker Cicada Audio CXXM65 Mid-Bass Quantity Two / one pair Mid-Bass Impedance Options 2Ω or 4Ω per speaker Mid-Bass Power Handling 100W RMS / 200W maximum per speaker Road Glide Grille Kit 24CHDRGGTK-075 Road Glide Tweeters Two RR075T 4-ohm horn tweeters Street Glide Grille Kit 24CHDSGGTK-05 Street Glide Tweeters Two RR05T 4-ohm horn tweeters Tweeter Crossovers Included with the selected grille and tweeter kit Amplifier Included No DSP or A2B Interface Included No Power and Speaker Wiring Included No Total Front-Stage Drivers Four: two mid-bass speakers and two tweeters Fitment and Ordering Notes Select Road Glide or Street Glide before adding the bundle to the cart. Select the CXXM65 impedance required by the amplifier configuration. The 2Ω or 4Ω option applies only to the CXXM65 mid-bass speakers. The RR075T and RR05T tweeters remain 4Ω in every configuration. Road Glide and Street Glide grille kits are not interchangeable. Verify motorcycle year, model, trim and fairing design before ordering. Confirm speaker mounting depth and factory enclosure clearance. Confirm amplifier power, impedance stability and channel configuration. Amplifier, DSP, A2B interface and wiring are sold separately. Professional installation and tuning are recommended. Current Shipping Promotion Enter code ShipOne at checkout for eligible free shipping. Current checkout requirements and product exclusions apply. Related Motorcycle Audio Categories Harley Speaker Upgrades Motorcycle Speakers Cicada Audio 2023.5+ / 2024+ Harley Audio Kits Amplifier and Signal Support Motorcycle Amplifiers Motorcycle Amplifier Parts Motorcycle DSP and Signal Integration Installation Support Motorcycle Audio Installation in Taylors, SC Request a Custom Audio Build Motorcycle Audio Batteries Cicada Fairing Speaker and Tweeter Kit FAQ Which motorcycles are covered by this bundle? The available configurations are designed for compatible 2024 and newer Harley-Davidson Road Glide and Street Glide motorcycles. Which speakers are included? Every bundle includes one pair of Cicada Audio CXXM65 6.5-inch dedicated mid-bass speakers. Can I choose 2-ohm or 4-ohm speakers? Yes. The CXXM65 mid-bass pair is available in either 2Ω or 4Ω. Does the impedance selection change the tweeters? No. The impedance option applies only to the CXXM65 mid-bass speakers. The included RR075T or RR05T tweeters remain 4Ω. Which tweeters come with the Road Glide kit? Road Glide configurations include the 24CHDRGGTK-075 grille kit with two Cicada RR075T horn tweeters. Which tweeters come with the Street Glide kit? Street Glide configurations include the 24CHDSGGTK-05 grille kit with two Cicada RR05T horn tweeters. Are the tweeter crossover networks included? Yes. The required crossover networks are supplied with the selected model-specific grille and tweeter kit. Does the bundle include an amplifier? No. The amplifier must be selected according to the chosen mid-bass impedance, desired output and final system design. Does the bundle include a DSP or A2B interface? No. Factory-radio signal integration and processing equipment are sold separately. Can I use Road Glide grilles on a Street Glide? No. The grille shapes and mounting locations are specific to each fairing design. Is professional installation recommended? Yes. Proper mounting, crossover wiring, polarity, amplifier matching, gain setting and system tuning are important for reliable performance. Need Help Matching This Cicada Fairing Speaker Kit? Garage Bagger Stereo can help verify 2Ω or 4Ω impedance selection, amplifier matching, speaker and grille mounting, power and speaker wiring, and factory or aftermarket signal integration before installation. Installation Services Request a Custom Build
CXXM65.2 speaker pair 24CHDRGGTK-075 Road Glide
CXXM65.4 speaker pair 24CHDRGGTK-075 Road Glide
CXXM65.2 speaker pair 24CHDSGGTK-05 Street Glide grille and RR05T
CXXM65.4 speaker pair 24CHDSGGTK-05 Street Glide grille and RR05T