UltraScape Flowpoint Premium Smooth Rapid Setting Paving Grout – 25kg

UltraScape Flowpoint Premium Smooth Rapid Setting Paving Grout – 25kg UltraScape Flowpoint Premium Smooth is a high-performance rapid setting flowable paving grout designed to create strong, smooth and consistent joints in bound paving installations. Mixed with clean water and poured directly over pre-wetted paving, the fluid grout is worked into the joints using a suitable rubber squeegee or float for fast and effective jointing. Ideal for paving slabs, cobble setts, natural stone and porcelain paving, Flowpoint Premium Smooth creates a hard-wearing joint suitable for patios, paths, steps, landscaping projects and areas subject to vehicular traffic. Its smooth finish makes it particularly well suited to projects where a clean, refined joint appearance is required. Main Benefits ✓ Premium smooth finish for clean, consistent paving joints ✓ Flowable application quickly fills paving joints ✓ Suitable for paving slabs and cobble setts ✓ Suitable for natural stone and porcelain paving ✓ Joint widths from 4mm to 50mm ✓ Rapid setting for faster project completion ✓ Open to foot traffic after approximately 1 hour ✓ Open to vehicular traffic after approximately 4 hours ✓ Strong and hard-wearing for demanding paving installations ✓ Exceeds the requirements of BS 7533 ✓ Available in Yorkstone, Stone Grey and Limestone Product Details • Product Type: Rapid setting flowable paving grout • Pack Size: 25kg bag • Colours: Yorkstone, Stone Grey and Limestone • Joint Width: 4–50mm • Joint Depth: 20–200mm • Application: Pour and work into the joints using a suitable rubber squeegee or float • Foot Traffic: Approximately 1 hour • Vehicular Traffic: Approximately 4 hours • Suitable For: Paving slabs, cobble setts, natural stone and porcelain paving Available Colours • Yorkstone – a warm, traditional tone ideal for buff and warmer paving colours • Stone Grey – a versatile neutral grey suited to contemporary and traditional paving • Limestone – a lighter natural tone ideal for pale stone and porcelain paving Ideal Uses ✓ Natural stone patios ✓ Porcelain paving ✓ Cobble sett installations ✓ Garden paths and walkways ✓ Steps and paving details ✓ Driveways and areas subject to vehicular traffic ✓ Traditional and contemporary landscaping projects ==specification-part== Product Specifications General Manufacturer Instarmac Group plc Brand UltraScape Product Flowpoint Premium Smooth Product Type Rapid Setting Flowable Paving Grout Pack Size 25kg Bag Colours Yorkstone, Stone Grey & Limestone Joint Requirements Joint Width 4–50mm Joint Depth 20–200mm Joint Finish Smooth, consistent and hard-wearing Installation Type Bound paving installations Performance Set Time Rapid setting Setting time varies according to temperature and site conditions. Foot Traffic Approximately 1 hour Vehicular Traffic Approximately 4 hours Compressive Strength >35 N/mm² Standard Exceeds the requirements of BS 7533 Permeability Permeable when installed as part of an appropriate paving system Frost Resistance Suitable for external paving applications exposed to normal UK weather conditions Compatibility & Uses Natural Stone Paving Suitable Porcelain Paving Suitable Concrete Paving Suitable Cobble Setts Suitable Patios & Paths Suitable Driveways Suitable when installed as part of an appropriate bound paving construction Steps & Edging Suitable for appropriate bound paving applications Application Application Method Flowable application – pour onto the prepared paving and work thoroughly into the joints using a suitable rubber squeegee or float Brush-In Product No – Flowpoint Premium Smooth is a flowable grout and must be properly worked into the joints Preparation Ensure the paving and joints are clean and suitably prepared. Thoroughly pre-wet the paving in accordance with the manufacturer's application instructions. Mixing Mix the complete bag with the specified quantity of clean water until a consistent, fluid and lump-free grout is achieved. Application Pour the mixed grout across the paving and use a suitable rubber squeegee or float to force the material completely into the joints. Finishing & Cleaning Allow the grout to achieve sufficient initial set before cleaning excess material from the paving in accordance with UltraScape installation guidance. Trial Area A small trial area is recommended before full application, particularly on textured, porous or sensitive paving materials. Colour Options Yorkstone Warm traditional joint colour Stone Grey Neutral grey joint colour Limestone Light natural joint colour Manufacturer Information Manufacturer Instarmac Group plc Brand UltraScape Product Range UltraScape Jointing Manufacturer Description A premium rapid setting flowable paving grout designed to produce strong, durable and smooth joints in bound paving installations. Manufacturer Guidance Always follow the latest UltraScape technical, preparation, application and safety guidance before use. Working and setting times vary according to temperature, weather and site conditions. Coverage depends on paving dimensions, joint width and joint depth. Flowpoint Premium Smooth is a flowable paving grout and should not be treated as a dry brush-in jointing compound. Always follow the latest UltraScape installation guidance.