Copper Thrower Flashlight Head with SFT25R-6500K LED for All Edoluc 14500/AA Flashlights

Compatible with the threaded bodies of all Edoluc 14500 flashlights. Thrower Head Size: 23mm*45mm(H) LED: SFT25R - 6500K Features Entering Programming Mode: Turn on the flashlight and quickly half-press the tail switch more than 8 times. When the LED flashes rapidly, it indicates that the flashlight has entered programming mode. Programming Mode Features: A. Selecting Output Groups (5 Groups Available): After entering programming mode: The LED will flash slowly once, followed by a series of fast flashes. Press the switch during the fast flashes to enter the mode selection process. How to select output groups: Slow flash 1 time, followed by fast flashes: Press the switch to select Group 1. Slow flash 2 times, followed by fast flashes: Press the switch to select Group 2. Slow flash 3 times, followed by fast flashes: Press the switch to select Group 3. Slow flash 4 times, followed by fast flashes: Press the switch to select Group 4. Slow flash 5 times, followed by fast flashes: Press the switch to select Group 5. If no selection is made for a given option, the cycle will repeat once. If no option is selected after two cycles, the flashlight will exit programming mode. Output Groups: Moonlight - 40% Moonlight - 30% - 100% Moonlight - 5% - 30% - 100% Moonlight - 30% - 100% - Strobe Moonlight - 10% - 50% - Strobe - SOS Default Factory Setting: Group 2: Moonlight - 30% - 100%, Memory OFF. B. Enabling or Disabling Memory Function (Default: Disabled) In programming mode, the LED will slow flash 2 times, followed by fast flashes. During the fast flashes, press the switch to toggle memory mode on/off. C. Enabling or Disabling Moonlight Mode In programming mode, the LED will slow flash 3 times, followed by fast flashes. During the fast flashes, press the switch to enable or disable Moonlight mode. D. Changing Mode Order (Default: Low → Medium → High) In programming mode, the LED will slow flash 4 times, followed by fast flashes. During the fast flashes, press the switch to change the order to High → Medium → Low. E. Restoring Factory Settings (Default settings: Memory OFF, Moonlight mode ON, Low → Medium → High order) In programming mode, the LED will slow flash 5 times, followed by fast flashes. During the fast flashes, press the switch to restore factory settings. Switch Functions: Half-press (light press): Cycle through modes. Double press quickly: Activate 70% brightness. Triple press quickly: Activate strobe mode. *Use of light in “strobe” mode may cause seizure in persons with photosensitive epilepsy.*