Drolet Columbia II Wood Stove DB03016

Drolet Columbia II Wood Stove DB03016 Product Description Of medium size, the Columbia II wood stove is ideal for heating spaces up to 1,800 ft² with a maximum heat output of 65,000 BTU/h. EPA certified at 1.26 g/h, this non-catalytic unit represents an eco-responsible heating source. The Columbia II is equipped with side panels to reduce clearances to combustible materials, as well as a top air deflector, to boost air movement through the room. Included: cast iron legs with ash drawer, top air deflector, ceramic glass, side panels, ash lip, air damper Up to 6 hours burn time Up to 18'' logs 1.9 ft³ firebox Heavy duty 5/16'' steel top EPA certified Proudly made in Canada Limited lifetime warranty Certified for mobile home and alcove installation Weight : 301 lbs Specifications Fuel type Dry cordwood (16" recommended) Recommended heating area (9) 500 - 1,800 ft² Overall firebox volume 1.9 ft³ EPA loading volume 1.44 ft³ Maximum burn time (9) 6 h Maximum heat output-dry cordwood (4) 65,000 BTU/h (19 kW) Minimum overall heat output rate (4) (5) 15,650 BTU/h (4.6 kW) Maximum overall heat output rate (4) (5) 23,300 BTU/h (6.83 kW) Average overall efficiency-dry cordwood (HHV) (5) (6) 70 % Average overall efficiency-dry cordwood (LHV) (5) (7) 75 % Optimum efficiency (1) (2) 78 % Optimum heat transfer efficiency (8) 74 % Average particulate emission rate (3) 1.26 g/h Average CO (10) 58 g/h Size Medium Alcove installation approved Yes Mobile home approved Yes, with fresh air intake Premium quality blower included (CFM) Optional Certified according to applicable standards By an accredited laboratory (CAN/USA) Combustion technology Non-catalytic Stainless-steel secondary-air system Yes Flue outlet diameter 6" Distance-center of the flue outlet to back unit 7 1/2" Distance-center of the flue outlet to side unit 12 /1/2" Chimney diameter 6" Type of chimney CAN/ULC S629, UL 103 HT (2100 °F) Minimum chimney height 12' Overall dimension (Width) 25 5/8" Overall dimension (Depth) 25 1/8" Overall dimension (Height) 29'' Door type Single, glass with cast iron frame Door opening size (Width) 17 1/4" Door opening size (Height) 8" Glass type Ceramic glass Glass surface - W x H 15 3/4" x 9 3/4" Firebox size (Width) 19 5/8" Firebox size (Height) 11 7/8" Firebox size (Depth) 13 1/2" Maximum log length 18" Log positioning Loading over width Firebox lined with refractory bricks Yes Baffle type High quality vermiculite High-efficiency certified appliance Yes, EPA 2020 approved Canadian Standard (emissions) CSA B415.1-10 USA Standard (emissions) EPA Canadian Standard (safety) ULC S627 USA Standard (safety) UL 1482, UL 737 Steel thickness-body 3/16" Steel thickness-top 5/16" Warranty Limited lifetime Shipping weight 317 lb (144 kg) Clearance To Combustibles Country Canada United States Size Single wall pipe Double wall pipe Single wall pipe Double wall pipe Clearance - Back wall 14 1/2" 7 1/2" 13" 7 1/2" Clearance - Side wall 10" 10" 10" 10" Clearance - Corner 12" 12" 12" 12" Clearance - Base of the unit to ceiling** 84" 84" 84" 84" The information given on the certification label affixed to the appliance always overrides the information published in any other media (owner's manual, catalogues, flyers, magazines and/or web sites). Some appliances have been tested with a low ceiling. Before setting up your unit, refer to the installation manual. Performances based on a fuel load prescribed by the standard at 7 lb/ft³ and with a moisture content between 19% and 25%. Optimum overall efficiency at a specific burn rate (LHV). This appliance is officially tested and certified by an independent agency. The maximum heat output (dry cordwood) is based on a loading density varying between 15 lb/ft³ and 20 lb/ft³. Other performances are based on a fuel load prescribed by the standard. The specified loading density varies between 7 lb/ft³ and 12 lb/ft³. The moisture content is between 19% and 25%. As measured per CSA B415.1-10 stack loss method. Higher Heating Value of the fuel. Lower Heating Value of the fuel. The optimum heat transfer efficiency is for the low burn rate (using HHV) and represents the appliance’s ability to convert the energy contained in the solid fuels into energy transferred to the room in the form of heat and does not take into account the chemical losses during combustion. Recommended heating area and maximum burn time may vary subject to location in home, chimney draft,heat loss factors, climate, fuel type and other variables. The recommended heated area for a given appliance is defined by the manufacturer as its capacity to maintain a minimum acceptable temperature in the designated area in case of a power failure. Product Documents Installation & Operation Requirements Dimensions