Veraune Alabaster Brass Bar Wall Sconce

Alabaster wall sconce · gold or nickel Veraune, stone light behind brass lines. Panels of natural alabaster sit side by side behind a row of slim vertical brass bars, held by small round fasteners. Switched on, the stone glows warm from within, its cloudy veining drifts across the face and the bars draw fine lines of shadow over the light. 25.6″65 cm tall 10.2″26 cm wide 4.3″From the wall E12Candelabra Gold or nickelWhere to hang it Full specificationsEvery line, measured. The finish changes only the frame. The alabaster, the size and the bulbs stay the same on both. GoldNickel incm The drawing and the bar on each card switch with the finish. Width10.2 in26 cm Height25.6 in65 cm From the wall4.3 in11 cm FrameGold + WhiteNickel + White MaterialsBrass frame, natural alabaster panels W 10.2 inW 26 cmH 25.6 inH 65 cm SocketE12 / E14 candelabra BulbsUp to 25W each, not included SuggestedFrosted 3000K warm white LED candle bulbs MountingHardwired to a wall junction box SwitchWorks with a wall switch (not included) OptionsSingle or set of 2 Light and shadowLit from within, lined in brass. Instead of a bare bulb, Veraune sends its light through stone first, then draws over it with brass. 01 The stone glows Light passes through the alabaster and warms it from pale white to soft amber. 02 The veining drifts Lit from behind, the cloudy veining shows through and moves across the face of each panel. 03 The bars draw lines Slim vertical brass bars sit in front of the stone and cast fine lines of shadow over the light. Switched off, the bars read as clean gold lines over pale, cloud-veined stone. Up closeBars, fasteners and stone. A flat brass frame, slim bars in front, panels of alabaster behind and small round fasteners to hold them, nothing more. 1Round fastener2Brass bar3Alabaster panel4Side rod 01Round fastener Small brass fasteners hold each panel at the top and bottom, a neat Deco detail.02Only 4.3 in deep The flat frame sits close to the wall, so it suits hallways and the space beside a bed.03Mounting plate A frame and bracket fix to a wall junction box; a licensed electrician is recommended. 8 ft ceiling1 ft2 ft3 ft4 ft5 ft6 ft7 ft8 ft5 ft 9 in · 175 cmCenter 60 in · 152 cmCenter 66 in · 168 cmEvery 8–10 ftDrawn to scale at 9 ft apart Where to hang itBeside the bed, down the hall. Beside a bedHallway Beside a bed Center at about 60 inHang it to the side of the headboard with its center about 60 in from the floor, so the glow lands at pillow height. Center height60 in152 cm Sconce height25.6 in65 cm From the wall4.3 in11 cm In a hallway Center at about 66 inRaise it to about 66 in so it clears passing shoulders, and repeat every 8 to 10 ft for an even rhythm of light. Center height66 in168 cm Repeat every8–10 ft2.4–3 m From the wall4.3 in11 cm Heights are to the center of the sconce. Have the junction box placed at that height before installation. In the roomSingle, or a set of two. A tall, flat line of light with a calm, modern Deco feel, at home beside a sideboard, a mantel or a bed. Set of 2 · gold Either side of the sideboard A pair frames the dining wall and lights it with a soft, even glow. Set of 2 · gold Flanking the art Centered on the piece between them, at matching heights. Set of 2 · gold Either side of the fireplace Tall enough to balance a stone chimney breast. Single, pair or row One sconceBeside a bed or reading chair, centered about 60 in from the floor. A pairEither side of a bed, mirror, sideboard or mantel, at the same height. A rowDown a hallway at about 66 in, repeating every 8 to 10 ft. Gold or nickelThe finish changes only the frame; the stone, size and bulbs stay the same. Natural alabasterCut from stone, panel by panel. Each panel is cut from natural alabaster, so the cloudy veining on your sconce is its own. From the block Natural alabaster arrives as rough blocks, each with its own pattern. Cut into panels The stone is cut into flat panels thin enough to let light through. One of a kind Because every panel is natural stone, the veining varies from piece to piece. CareKeep the stone pale, the bars bright. Alabaster is a soft, porous stone and the frame is finished metal, so both need only a light, dry touch. 01Switch off first Turn it off at the wall and let the bulbs and stone cool before you clean. 02Dust the stone dry Use a soft, dry microfiber cloth or a soft brush over the panels. 03Skip water and sprays Water, glass cleaner and household sprays can mark or dull the alabaster. 04Bars, dry cloth only Wipe the gold or nickel bars with a dry cloth; skip metal polish so the finish stays even. FAQBefore you wire it in. Quick answers on bulbs, size, height and finish. Size10.2 × 25.6 in From wall4.3 in / 11 cm BulbsE12 / E14, max 25W MountingHardwired OptionsSingle / set of 2 Are bulbs included, and which ones should I buy?No, bulbs are not included. Veraune takes E12 / E14 candelabra bulbs, up to 25W each. Frosted 3000K warm white LED candle bulbs suit it best; the final light color depends on the bulbs you choose.How big is it, and how far does it stick out?It measures 10.2 in (26 cm) wide and 25.6 in (65 cm) tall, and sits just 4.3 in (11 cm) from the wall.How high should I hang it?Beside a bed, hang it with its center about 60 in (152 cm) from the floor. In a hallway, center it at about 66 in (168 cm) and repeat every 8 to 10 ft.What changes between gold and nickel?Only the frame. The alabaster panels, the size and the bulbs are the same on both finishes.How is it installed and switched?It is hardwired to a wall junction box and works with a wall switch, which is not included. Installation by a licensed electrician is recommended.Is the alabaster real?Yes. Each panel is cut from natural stone, so the veining varies from piece to piece and your sconce will have its own pattern.