Medical Lock Pins - 2 pieces (for FrostLock® Pro and wall mounts)

A pair of spare lock pins for medical-style restraint setups. These medical lock pins are the mechanical interface between medical-style restraint straps and your FrostLock® Pro lock. Each pin screws into the M6 thread of either wall mount or of the FrostLock® Pro and holds the strap eyelet in place, secured by a lock cap from Klinikbondage or a comparable manufacturer (not included). The shaft is smooth with a collar at the top: it passes through the metal eyelet of the strap, and the lock cap closes it off so the strap sits flat and cannot slip off. The FrostLock® Pro takes a pin on two of its faces, so you can connect two straps to a single lock. On either wall mount, one pin turns the plate into a fixed anchor point. The set contains two pins, so you can run two straps from a single setup — or simply keep a spare at hand. Turned from stainless steel and deburred, the pins are made to be screwed in and out repeatedly without wear on the thread. Technical details: Contents: 2 × medical lock pin Material: stainless steel Thread: M6 external thread Weight: 10 g (set) Note: Lock caps, straps, discs and locks shown in the images are not included.