Tornado BR 13/2 Compact Cordless Cylindrical Scrubber

The Tornado BR 13/2 Floor Scrubber may be the Answer to Your Tight-Space Cleaning Problem! If you've got hallways, restrooms, or service corridors too narrow for a standard auto scrubber, your staff is probably still pushing a mop through them. And a mop doesn't clean floors. It just redistributes dirty water and calls it a day. The BR 13/2 was built specifically for those spaces. At just 18 inches wide with a 13 in (33 cm) cleaning path, this small floor scrubber for tight spaces gets into the corners and corridors that full-size machines can't reach, and it actually scrubs them clean rather than smearing them around. The BR 13/2 runs on a 12V / 75 Ah AGM battery with a runtime of 60+ minutes per charge, and the onboard 6-amp charger means you're not hunting for a separate charging unit or leaving it plugged into the wall between uses. Yes, it comes with a charger, right out of the box. As a cordless floor scrubber it gives operators full freedom of movement with no cord management, no outlet hunting, and no tripping hazards mid-shift. The 2.6 gal (9.8 L) solution and recovery tanks are sized appropriately for the machine's target areas, and the rotomolded tank construction is covered by a 10-year warranty. This is a walk-behind machine that handles the daily scrubbing load in facilities where tight access has historically meant settling for a mop. At 147 lbs (66.7 kg) with a theoretical productivity of up to 10,582 sq ft/hr (983 sq m/hr), the BR 13/2 doesn't sacrifice cleaning performance to hit its compact footprint. The handle folds flat for storage and the machine can stand on its end, so it tucks away wherever space allows, which, given the market it serves, seems fitting. What Makes the Tornado BR 13/2 Scrubber Worth the Switch from a Mop Dual cylindrical brushes rotate at 450 rpm with 32 lbs (14.5 kg) of combined brush pressure. That's real mechanical scrubbing, not surface-level agitation. Pre-sweep function and built-in debris collection tray pick up light debris automatically before scrubbing, so operators don't need to pre-sweep in most situations. Double Scrub mode lets operators make a second slow pass over heavily soiled areas without refilling. Solution is recirculated for a second hit before recovery. Onboard 6-amp AGM charger is built into the machine, no separate charging station required. Plug in at the end of a shift and it's ready to go. 60+ minute runtime varies by floor type and ambient temperature. Colder environments and more textured floors use more power, but most operators get a full cleaning cycle on a single charge. 20.5 in (52.1 cm) squeegee recovers further than the brush path on each side, which means less re-wetting and drier floors behind the machine. 26.5 in (67.3 cm) water lift from the 250W suction motor ensures solid recovery even on textured or slightly uneven surfaces. Sound level of 65 dB(A) keeps noise in the range of normal conversation, comfortable enough for daytime use in occupied spaces like hotels, schools, and offices. Foldable handle and stand-on-end storage make the BR 13/2 easy to transport in a utility elevator and store in a closet or narrow storage room. Max solution temperature of 122°F (50°C) means hot-water cleaning chemicals can be used where sanitation standards call for it. 4-year parts / 2-year labor / 10-year rotomolded tank warranty from Tornado is among the stronger coverage packages in this class. BR 13/2 parts are available through OneUp Cleaning, so routine maintenance items like brushes and squeegee blades don't require going back to Tornado directly. Which Floors Does the BR 13/2 Cylindrical Scrubber Handle Best? A disk scrubber rolls right over grout lines. Cylindrical brushes drive bristles end-over-end directly into grout channels, which is why the BR 13/2 works as a compact grout scrubber on surfaces where pad-based machines come up short. Here's where it performs well: Tile and grout: ceramic, quarry tile, porcelain; the brush geometry was made for this VCT: standard daily scrubbing, no special setup needed Concrete and epoxy: good traction for the brushes, solid results Rubber and vinyl: common in gyms, kitchens, and corridors Terrazzo and linoleum: handles both without issue Smooth or polished surfaces (LVT, polished concrete): the machine ships ready for general use; a soft-bristle brush option is available for more delicate finishes The 2% maximum gradient spec means flat interior floors only. Not ramps, not parking structures. How the BR 13/2 Floor Scrubber Actually Cleans Solution goes down, dual brushes scrub, and the 20.5 in (52.1 cm) squeegee recovers dirty water into the 2.6 gal (9.8 L) recovery tank, all in one pass. No, you don't need to pre-sweep first. The built-in debris tray handles light debris automatically. For heavily soiled areas, Double Scrub mode recirculates solution for a second pass without refilling. The operating temperature range of 50–104°F (10–40°C) applies to both use and charging, worth noting for unheated storage. The Tornado Compact Cylindrical Scrubber Built for Real Facility Constraints Most compact scrubbers in this size class cut corners somewhere. The BR 13/2 runs a 250W brush motor and a separate 250W suction motor, 500W total, which is a real dual-motor setup. The 13 in (33 cm) path fits standard doorways, the handle folds flat, and the machine can stand on its end for storage. Battery runtime is 60+ minutes on a full charge, and the onboard charger is included right out of the box. Plug in at the end of a shift, done. Specifications — Tornado BR 13/2 Compact Cylindrical Scrubber Brand Tornado Manufacturer Tornado Industries Model Number TS070-W13-UG Cleaning Performance Cleaning Path 13 in (33 cm) Squeegee Width 20.5 in (52.1 cm) Productivity (Theoretical Max) 10,582 sq ft/hr (983 sq m/hr) Brush RPM 450 rpm Brush Pressure 32 lbs (14.5 kg) Brush Diameter 4.3 in (10.9 cm) Brush Motor 250 W Pre-Sweep Function Yes Double Scrub Yes Debris Collection Tray Yes Tanks Solution Tank Capacity 2.6 gal (9.8 L) Recovery Tank Capacity 2.6 gal (9.8 L) Tank Construction Rotomolded Max Solution Temperature 122°F (50°C) Tank Head Height 14 in (35.6 cm) Motor & Suction Suction Motor 250 W Vacuum Water Lift 26.5 in (67.3 cm) Rated Power (Total) 500 W Battery & Charging Battery 12V / 75 Ah AGM Onboard Charger 6 Amps, 115V Runtime 60 min+ (varies by floor type and temperature) Operating / Charging Temp Range 50–104°F (10–40°C) Physical Machine Dimensions (L × W × H) 28 in × 18 in × 43.5 in (71 cm × 45.7 cm × 110.5 cm) Weight 147 lbs (66.7 kg) Maximum Gradient 2% Sound Level 65 dB(A) Warranty Warranty 4 years parts / 2 years labor / 10 years rotomolded tanks Downloads Tornado BR 13/2 Operator Manual BR 13/2 Manual Tornado BR 13/2 Product Brochure BR 13/2 Brochure