Head Gasket 82.2mm 2-Notch MLS – VW, Audi & SEAT 2.0 TDI Engines

Product Description Restore proper engine sealing and compression with this premium-quality 82.2mm Multi-Layer Steel (MLS) Cylinder Head Gasket. Designed for a wide range of Volkswagen, Audi, and SEAT 2.0 TDI engines, this head gasket provides exceptional durability, thermal stability, and sealing performance under high combustion pressures. Manufactured using a 4-layer MLS construction, this gasket is engineered to withstand extreme temperatures and pressures commonly found in modern turbocharged diesel engines. It is suitable for engines with piston protrusion between 1.01mm and 1.10mm and features a 2-notch identification design with an installed thickness of 1.63mm. Ideal for professional engine rebuilds, cylinder head repairs, and head gasket replacement procedures. Vehicle Compatibility AUDI A3 (8P1) 2003–2012 2.0 TDI 16V (BKD, CBAB, CFFB, CLJA) – 103kW A3 Sportback (8PA) 2005–2013 2.0 TDI 16V (BKD, CBAB, CFFB, CLJA) – 103kW A4 B8 (8K2) 2008–2017 2.0 TDI (CAGA, CJCA, CMEA, CMFA) – 105kW 2.0 TDI (CAGB, CJCB, CSUB) – 100kW 2.0 TDI (CGLC, CMGB) – 130kW A4 B8 Avant (8K5) 2008–2017 2.0 TDI (CAGA, CJCA, CMEA, CMFA) – 105kW 2.0 TDI (CGLC) – 130kW A4 Allroad B8 (8KH) 2012–2017 2.0 TDI Quattro (CGLC) – 130kW A5 (8T3) 2008–2017 2.0 TDI (CGLC) – 130kW A5 Convertible (8F7) 2009–2017 2.0 TDI (CGLC) – 130kW A5 Sportback (8TA) 2010–2017 2.0 TDI (CGLC) – 130kW A6 C7 (4G2, 4GC) 2011–2019 2.0 TDI (CGLC, CMGB) – 130kW Q3 (8UB, 8UG) 2012–2019 2.0 TDI (CFFB, CLJA) – 103kW 2.0 TDI Quattro (CFGC, CLLB) – 130kW Q5 (8RB) 2009–2026 2.0 TDI Quattro (CAHA, CGLB, CMGA) – 125kW 2.0 TDI Quattro (CGLC, CMGB) – 130kW SEAT Altea (5P1) 2004–2026 2.0 TDI 16V (BKD, CFHC) – 103kW Leon (1P1) 2005–2012 2.0 TDI 16V (BKD, CFHC, CLCB) – 103kW VOLKSWAGEN Amarok 2010–2023 2.0 BiTDI (CDCA) – 120kW 2.0 BiTDI (CNEA, CSHA) – 132kW 2.0 TDI (CDBA, CNFA) – 90kW 2.0 TDI (CNFB) – 103kW Caddy III & IV 2.0 TDI (CLCA) – 81kW 2.0 TDI (CFHC, CLCB) – 103kW California T5 & T6 2.0 TDI / BiTDI (CAAC, CFCA) – 103kW–180kW Caravelle T5 & T6 2.0 TDI / BiTDI (CFCA) – 132kW CC B6 & B7 2.0 TDI (CBBB, CFGB, CLLA) – 125kW 2.0 TDI (CFGC) – 130kW Crafter 2.0 TDI (CKTB, CKUC, CKUB, CSLA, CSNA) – 80kW–163kW Golf VI 2.0 TDI (CBAB, CFFB, CJAA) – 103kW Jetta VI 2.0 TDI (CFFB, CFHC, CJAA, CLCB) – 103kW Passat B7 2.0 TDI (CFFB) – 103kW Tiguan 2.0 TDI (CFFD, CUVE) – 81kW–110kW 2.0 TDI 4Motion (CBAB, CFFB, CLJA) – 103kW Touran 2.0 TDI (CFHF, CLCA) – 81kW–110kW Transporter T5 & T6 2.0 TDI (CAAB, CAAC, CCHA, CXGB) – 75kW–140kW 2.0 BiTDI (CFCA) – 132kW Key Features Premium Multi-Layer Steel (MLS) construction 4-layer gasket design for superior sealing Bore diameter: 82.2mm Installed thickness: 1.63mm 2-notch identification Suitable for piston protrusion 1.01mm–1.10mm Excellent resistance to heat and combustion pressure Designed for professional engine rebuilds and repairs Direct replacement for OE specifications Technical Specifications Specification Details Product Type Cylinder Head Gasket Gasket Design MLS (Multi-Layer Steel) Diameter 82.2mm Thickness 1.63mm Installed Thickness 1.63mm Number of Layers 4 Notches/Holes 2 Piston Protrusion Range 1.01mm – 1.10mm Additional Required Article 189.380 Installation Notes Always measure piston protrusion before selecting a replacement head gasket. Replace cylinder head bolts during installation. Ensure cylinder head and engine block surfaces are clean and checked for flatness. Follow manufacturer torque specifications and tightening sequence. Professional installation is recommended.