Alien HT - High Translucency Zirconia

We don't just make it, we mill it everyday! Get unmatched support when you buy Alien Zirconia Blocks from a team of professionals who use these blanks on a daily basis. Now you can mill Alien Zirconia in your lab. Experience the highest quality and translucency the Zirconia world has to offer. Over 100,000 satisfied patients, doctors, and labs. Available in... White Zirconia 98mm Puck 98 mm x 12 mm 98 mm x 16 mm 98 mm x 20 mm 98 mm x 25 mm 98 mm x 30 mm 98 mm x 35 mm Pre-Shaded Zirconia 98mm Puck (A1-D4) 98 mm x 12 mm 98 mm x 16 mm 98 mm x 20 mm 98 mm x 25 mm 98 mm x 30 mm 98 mm x 35 mm Compatibility 98mm with a 10mm step. Compatible with Weiland, VHF, Roland, and most open CAD CAM Milling Machines. Isostatic Pressing Each Zirconia Blank is isostaically pressed for consistent results every time. We do not cut corners, as we use the exact same zirconia for our milling services. Gentle on your Mill Alien Zirconia Disks are softer in the green state, than generic zirconia. This extends the life of your spindle, and tools. Translucency Factor High Translucency has become a loosely used term to define the product, rather than the characteristics. The real definition lies in Translucency Parameters (TP), and Contrast Ratio (CR). The Contrast Ratio for Alien Zirconia Blanks are >34:1 CR %, one of the highest translucent zirconia offered in the industry. Research We research, and use 98 mm Alien Zirconia Blanks in our milling center everyday. We know our zirconia is out of this world. Many labs, doctors, and patients may be unaware Zirconia is a radioactive material. Safety is the main focus of the company, and we would not use unsafe materials exposing our technicians to unsafe materials. Our Research and Development engineers continually test the zirconia powder for any traces of radioactivity, and makes sure the zirconia is 100% safe every time. Material Safety Data Sheet and IFU Sintering Schedule For more programs, including programs for certain ovens, visit the sintering page Up to 45 Units Total Run Time: 12-13 Hours Step Start Temp C End Temp C Rate Climb / min Time (mins) 1 0 900 10 90 2 900 900 0 10 3 900 1540 3 214.00 4 1540 1540 0 150 5 1540 0 0 Natural Cooling Ivoclar Programat Oven Step t T H 1 10 900 10 2 3 1540 150 3 6 100 0 46 - 80 units Total Run Time: 16-17 Hours Step Start Temp C End Temp C Rate Climb / min Time (mins) 1 0 900 6 150 2 900 900 0 30 3 900 1540 3 214.00 4 1540 1540 0 270 5 1540 0 0 Natural Cooling Warp Speed 5-15 units (Fast Sintering) Up to 3 Unit bridges only Total Run Time: 2-2.5 Hours Step Start Temp C End Temp C Rate Climb / min Time (mins) 1 0 1540 35 44 2 1540 1540 0 60 3 1540 300 45 28 **CAUTION - Please check with your sintering oven manufacture if the oven is capable. Fast Sintering cycles add stress on your oven, causing parts to wear and tear sooner. FAST! Full Arch Hybrid Sintering Program (Beta) Total Run Time: 16.5 hours Step Start Temp C End Temp C Rate Climb / min Time (mins) 1 0 900 6 150 2 900 900 Hold 30 3 900 1540 3 214.00 4 1540 1540 Hold 270 5 1540 1300 6 40 6 1300 1300 Hold 30 7 1300 1200 4 25 8 1200 1200 Hold 30 9 1200 900 6 50 10 900 0 6 150 Full Arch Hybrid Sintering Program Total Run Time: 23-25 hours Step Start Temp C End Temp C Rate Climb / min Time (mins) 1 0 900 6 150 2 900 900 Hold 30 3 900 1540 3 214.00 4 1540 1540 Hold 270 5 1540 1300 0 Natural Cooling 6 1300 1300 Hold 120 7 1300 1200 0 Natural Cooling 8 1200 1200 Hold 120 9 1200 1100 0 Natural Cooling 10 1100 1100 Hold 120 11 1100 1000 0 Natural Cooling 12 1000 1000 Hold 120 13 1000 900 0 Natural Cooling 14 900 900 Hold 60 15 900 0 0 Natural Cooling Ivoclar Programat Oven Step t T H 1 10 900 10 2 3 1540 270 3 3 1200 0 4 6 1000 0 5 8 100 0