Toyota Tacoma Prinsu Pro Double Cab Cab Rack 1995-2004

44% Stronger. 0.75" from the Roof. Built for the 1st Gen. Prinsu Pro for 1995-2004 Toyota Tacoma Double Cab. 52" x 44" platform. Drop-in crossbars. Stainless steel hardware. The Prinsu Pro Roof Rack for the 1st Generation Toyota Tacoma Double Cab (1995-2004) is engineered for the serious overland enthusiast who demands modularity, strength, and a low-profile design from a truck that is now over two decades old and still going strong. Redesigned crossbars are 44% stronger than previous generations. Six integrated drop-in points per crossbar make securing gear faster and easier. A two-part side rail design with a reinforced top bend and recessed bolt-on mounting feet maximizes rigidity while maintaining a tight 0.75-inch clearance to the roof. The result is a 52" x 44" usable platform area that adds only 2.25 inches to your vehicle's height. Constructed from high-quality, corrosion-resistant aluminum with stainless steel hardware throughout. The front wind deflector can be configured with an optional cutout for seamless integration of a 40-inch light bar. Prinsu states that most of their racks have a static load capacity of 800 lbs and a dynamic load capacity of 400 lbs. Note: drilling into the roof is required for installation. Installation Notice Drilling Required: This install requires drilling into the roof for a secure, permanent mount that ensures maximum load capacity and structural integrity for off-road use. If you are not comfortable with drilling, have a qualified shop handle the installation. 52x44" Usable Platform 44% Stronger Crossbars 2.25" Added Height 0.75" Clearance to Roof Redesigned Crossbars: 44% Stronger The crossbars on the Prinsu Pro are 44% stronger than previous generations with an all-new profile engineered for heavier loads and more demanding use. Each crossbar features 6 integrated drop-in points that let you secure gear quickly without sliding hardware into the T-slot channel from the end. Drop accessories straight in from above, position them where you want, and lock them down. The drop-in points work alongside the full-length T-slot channels, so you still have unlimited mounting flexibility across the entire 52" x 44" platform. Two-Part Side Rail. 0.75" from the Roof. The Prinsu Pro features a two-part side rail design with a reinforced bend on top that increases rigidity and provides additional mounting accessory options. Recessed bolt-on mounting feet keep the profile incredibly tight against your Tacoma's roofline with only 0.75 inches of clearance between the rack and the cab roof. The total added height is just 2.25 inches. This is about as low-profile as a cab rack can get while still providing full platform functionality. Stainless Steel Hardware Kit The Pro features a high-strength stainless steel hardware kit that replaces the standard hardware from the Original series. Stainless steel resists corrosion in coastal environments, snowy climates with road salt, wet trails, and humid conditions. For a truck that could be 25-30 years old, the last thing you want is a new rack with hardware that starts rusting in the first year. Stainless steel keeps you on the trails and away from the shop. Endless Mounting Possibilities The Prinsu Pro is fully modular. Slide crossbars forward or backward to accommodate specific gear layouts. Bolt accessories into the T-slots or drop-in points anywhere on the rack without drilling new holes. Whether you are hitting the slopes for a ski trip, going to the beach for a surf trip, or loading up for an overland expedition, the Prinsu Pro gets you there. Rooftop tents, awnings, MaxTrax, Rotopax, light bars, cargo boxes, bike racks, kayak carriers, tie-down rings. Configure it once or reconfigure it every weekend. Engineering Details Redesigned Crossbar Profile Upgraded Mounting Strength Recessed Mounting Feet More Features Aluminum Construction: Constructed from high-quality, corrosion-resistant aluminum. Lightweight yet incredibly strong, ensuring durability for demanding off-road conditions and heavy loads. Protected by a durable powder coat finish that stands up to the elements. Light Bar Integration: The front wind deflector can be configured with an optional cutout for seamless integration of a 40-inch light bar. Choose the standard deflector for maximum noise reduction or the cutout version for a flush-mounted light bar that optimizes visibility for late-night trail runs. Low-Profile Design: Adding only 2.25 inches to your vehicle's height with 0.75-inch clearance to the roof keeps the 1st Gen Tacoma's profile tight. The rack maintains a sleek look while providing a full 52" x 44" platform for gear. Specifications Vehicle 1995-2004 Toyota Tacoma Double Cab (1st Generation) Usable Platform Area 52" x 44" Height Added 2.25" Clearance to Roof 0.75" Construction High-quality corrosion-resistant aluminum Finish Durable powder coat Hardware Corrosion-resistant stainless steel Crossbar Strength 44% stronger than previous generation Drop-In Points 6 integrated per crossbar Side Rail Design Two-part with reinforced top bend, recessed bolt-on mounting feet Wind Deflector Standard or cutout for 40" light bar Static Load Capacity ~800 lbs* Dynamic Load Capacity ~400 lbs* Installation Drilling into roof required *Prinsu states most racks have a static capacity of 800 lbs and dynamic capacity of 400 lbs. Actual capacity depends on your vehicle's roof structure, rack mounting, and driving conditions. 📄 Installation Instructions Download the Prinsu Pro 1st Gen Tacoma Double Cab install guide. Drilling into the roof is required. View Install Guide Pros 44% stronger crossbars with 6 integrated drop-in points per bar for fast gear attachment Only 2.25" of added height with 0.75" clearance to the roof, one of the tightest fits on any cab rack 52" x 44" usable platform provides ample space for rooftop tents, cargo, and accessories Two-part side rail with reinforced top bend for structural rigidity beyond the Original series Corrosion-resistant stainless steel hardware (critical for trucks that are 20-30 years old) Fully modular: T-slot + drop-in points provide unlimited configurations Optional 40" light bar cutout in the wind deflector for integrated lighting ~800 lbs static / ~400 lbs dynamic load capacity Cons Drilling into the roof is required. This is a permanent modification. Not reversible without repair Fits 1995-2004 Tacoma Double Cab only. Does not fit Access Cab, Regular Cab, or 2nd Gen (2005+) models Frequently Asked Questions Can I mount a rooftop tent on the 1st Gen Tacoma cab rack? Yes. With approximately 800 lbs of static load capacity and 400 lbs of dynamic capacity, the Prinsu Pro handles most rooftop tents plus occupants. The 52" x 44" platform accommodates compact and mid-size rooftop tents well. Verify that the combined weight of the rack, tent, and occupants does not exceed your Tacoma's roof structure capacity. Lighter wedge-style and compact hardshell tents are the best fit for a 1st Gen Tacoma cab. Browse our rooftop tent collection here. Does this rack require drilling? Yes. Drilling into the roof is required for the secure and robust installation of this rack system. This ensures maximum load capacity and structural integrity for off-road use. Drilled mounts provide a rock-solid connection that handles heavy loads and off-road vibration without loosening. If you are not comfortable with a drill, budget for professional installation at a local shop. What are the drop-in points? Each crossbar has 6 integrated drop-in points built into the bar profile. These are pre-cut slots that accept standard tie-down hardware, straps, or accessories without needing to slide them into the T-slot channel from the end. You drop accessories straight in from above, position them where you want, and lock them down. The T-slot channels are still there for unlimited additional flexibility. Does this fit the Access Cab or Regular Cab? No. This rack is designed specifically for the 1995-2004 Toyota Tacoma Double Cab. It does not fit the Access Cab (extended cab) or Regular Cab configurations. Each cab style has a different roofline and mounting point layout. Contact us at 844-200-3979 if you have a different cab style and we will help you find the right rack. Standard or cutout wind deflector? Choose the standard wind deflector if you do not plan to run a front-facing light bar. It provides maximum noise reduction. Choose the cutout version if you want to flush-mount a 40-inch LED light bar into the front of the rack for integrated lighting that optimizes visibility on late-night trail runs. Both options include noise-reducing trim. Complete Your Build Roof Top Tents - Mount a tent on your Tacoma Awnings - Add shade to your setup Tacoma Accessories - Build out your rig Overlanding Accessories - MaxTrax, Rotopax, and more Questions About the Prinsu Pro 1st Gen Tacoma? We will confirm year and cab style compatibility, help you choose the right wind deflector, and plan your build. 844-200-3979