Aluminium Stair Nosing - G Series Clear Anodised with Black Extruded Vinyl Internal/Dry Rated Insert

Specifications RANGE G SERIES PRODUCT CODE G-CLR-EXV-BLK TYPE SURFACE MOUNT / RETRO FIT SUITABILITY INTERNAL/DRY NOSE DESIGN SQUARE OVERALL PROFILE DIMENSIONS 75 x 30mm ALUMINIUM FINISH CLEAR ANODISED ALUMINIUM RECYCLABLE YES ALUMINIUM MANUFACTURED IN AUSTRALIA INSERT TYPE EXTRUDED VINYL INSERT SLIP RESISTANCE P3 INSERT COLOUR BLACK INSERT WIDTH 60mm FIXING METHOD GLUE & SCREW FIXING APPEARANCE CONCEALED FIXINGS Overview Typically used over carpeted stairs where the 30mm front return is emparts greater rigidity to the extrusion. Also used when greater protection to the leading edge is desirable - i.e. to protect tiles from chipping or to conceal worn or chipped stair edges AS 1428.1:2021 possible however, the light grey aluminium must blend in to the surrounds while the insert contrasts* The G SERIES stair nosing is specially designed for surface-mount installations The insert consists of a extruded vinyl surface which is non-abrasive to bare skin and is easy to clean (by way of mop, microfibre cloth etc.) The aluminium is CLEAR ANODISED (a light grey silver colour) Installed with a combination of adhesive and screws, this product offers trouble free performance in most internal environments Not recommended for fire isolated stairs - please see M-CLR-ABR-BLK *AS 1428.1:2021 compliance requires that if the front return exceeds 10mm, then the aluminium housing must 'blend in' to the surrounds. Light grey anodising will blend in with other light coloured surrounds (e.g. light carpet, tiles, vinyl, concrete etc). The vinyl insert must contrast to the surrounds by a minimum of 30% - black is the most effective at this. Details Designed for surface mount / retro-fit applications on existing stair treads 75mm wide aluminium profile is the maximum allowable dimensions under AS1428.1 and appeals to those seeking the highest level of safety on their stairs Suitable for use on square edged stairs, pencil edge as well as larger bull nosed edges (please contact us for technical recommendation if you have large bull nosed stairs) CLEAR anodised aluminium profile and BLACK insert provide contrast over light coloured substrates Concealed fixings - first the extrusion is fixed to the substrate by way of screws and adhesive, then the extrusion is adhered to the channel with high performance adhesive tape supplied Applications include office and residential buildings, schools, universities, hospitals, factories and houses UV stabilised materials for a long trouble-free service life Manufactured in Australia Scope of supply Anodised aluminium stair nosing extrusion with extruded vinyl insert and separate pressure sensitive adhesive tape roll for fixing to aluminium extrusion If 'cut to size' option is selected; aluminium will be supplied cut to the sizes specified If 'pre-drill' option is selected; aluminium will be supplied with countersunk holes pre-drilled at approximately 300mm centres and will also come with the appropriate fixings for the nominated substrate type