Ultra Bee Headlight & Taillight Stealth Kill Switch

Tired of the Always On Ultra Bee headlight design? Need to black out your taillight at a moments notice? This headlight/taillight stealth kill switch makes it easy and includes a unique mount next to the display, keeping your handlebars clean. The only headlight AND taillight switch. Choose between headlight & taillight kill switch kit or headlight only. Completely Plug & Play design. No wire cutting or soldering required! Button can be mounted on handlebars, or next to the display using included 3D printed mounting bracket. Compatibility: Surron Ultra Bee (all years) Contents: Kill switch - blue backlight Switch mounting bracket Taillight interruption cable (only with taillight kit) Installation: Unscrew handlebar mount from kill switch. Using the same screws, install the switch onto 3D printed mounting bracket. Unscrew 2 small silver bolts below display Put bolts into 3D printed mounting bracket and install back in original location Remove the headlight shroud (2 bolts on the side, 2 on top) Locate headlight connector and unplug. Plug kill switch in between headlight and bike wire harness. Locate taillight connector in wire bundle under seat (cut ziptie) Unplug small white 3 pin connector. Plug taillight interruption cable between 3 pin taillight connector. Run wire to the front (through subframe -> under battery tray -> behind controller -> behind headlight) Connect taillight interruption cable to kill switch. Tuck extra wire behind headlight shroud and reinstall bolts. Notes: Headlight/Taillight switch is different from headlight only. Headlight only kill switch does not have connection for taillight interruption cable. There are multiple ways to run the taillight interruption wire. It is up to you where to run the wire.