Häfele AXILO™ 78 Plinth System Foot And Shaft Section

The Häfele Axilo 78™ system is easy, convenient and efficient.Compromising 6 unique components - the top section, the shaft and foot section, the plinth panel clip, the plinth panel holder, the adjusting tool and finally the extension tool.The system is a specially designed plinth fitting and adjustment tool to enable perfect alignment of cabinetry. Not only saving you time but most importantly allowing you to work without awkward postures; no more bending, crawling or stretching required to get to the back of the cabinets.Using the 6 components, the arm which serves as an extension tool can be used from any angle to slot into the bottom of the specially designed foot section so it can be adjusted higher or lower as required.Please watch the video linked to the left for a demonstration. Robust plinth system with large foot Easy plinth installation Height adjustment with different screw-in parts and tubes Easy adjustment of glides Version Joiner/cabinet maker pack, fine thread Area of application For ergonomic and time-saving height adjustment of the AXILO® 78 plinth adjusting fitting system in the entire plinth area such as with corner cabinets Recycled content 100% Colour/finish Black Adjustment facility Height adjustment facility: Max. 80 kg cabinet weight Load bearing capacity 250 kg Note on load bearing capacity Load bearing capacity applies with static loads. During adjustment, the following applies: 80kg/foot under rotating load. Extendable to 110 kg/foot with ABS insert 637.76.423. Installation Plug fits into mounting plate