ImageTo3D

Upload a 2D Image to a 3D Model Get your Sterling Silver pendant from your image by the following steps: Upload a 2D image. file format .JPG or .PNG under file size 1GB. Choose your material and finish. We'll 3D print and handcrafts process your product. Receive your custom 3D printed product. Design Guideline The resultant ImageTo3D Model should contain one part only, with maximum bounding box size 70mm x 70mm x70mm, and minimum bounding box size 10mm x 10mm x 1mm, minimum wall thickness 1mm. We will do manual checks for the print-ability. Your model may shrink about 0.25 mm plus 2.5% after casting and finishing. For rings the inner diameter is accurate within +/- 0.1 to 0.15mm. On average, the model shrinks about 2.5% after finishing. Polishing gives this material a beautiful finish, but can have an impact on fine details. During the polishing step, fine or sharp-edged details may be polished down or even broken off. Keep this in mind when you're designing fine details. We can only polish well-reachable surfaces, so tight internal spaces may remain unpolished. Sterling Silver Fine Detail Polished: Extensive polishing will reach intricate details, achieving a very shiny surface. Extra polishing will remove more material so some details may get lost from polishing. Special Offer No minimum order is required. For bulk order more than 10 numbers of the same model, please contact us for special discount offer. Delivery Time Your unique design product is freshly made to order. The manufacturing process generally takes 14-21 working days after approval of your design. Afterwards, the delivery within Hong Kong will take 7 business days to arrive. Overseas deliveries can take anywhere from 7-14 days depending on where to go.