Allen-Bradley 2711P-T15C22A9P PanelView Plus 7 Performance Terminal

Allen-Bradley 2711P-T15C22A9P PanelView Plus 7 Performance Terminal Configured for operator visualization and touchscreen input in PanelView Plus 7 systems, the Allen-Bradley 2711P-T15C22A9P (2711P-T15C22A9P PanelView Plus 7 Performance Terminal) provides direct display, operator input, and Ethernet connectivity. Hardware Specifications Parameter Specification Model 2711P-T15C22A9P Brand Allen-Bradley Product Type PanelView Plus 7 Performance Terminal Product Line PanelView Plus 7 Display Size 15 in. Display Type Color active-matrix TFT LCD Display Resolution 1024 x 768 XGA, 18-bit color graphics Display Area 304 x 228 mm (12.0 x 9.0 in.) Operator Input Touchscreen Touch Technology Analog resistive Touch Actuation Rating 1 million presses Touch Operating Force 100 g Backlight White LED, solid-state Backlight Life 50,000 h minimum at 40 deg C to half-brightness Communication Ports Two Ethernet, three USB host Application Memory 1 GB system; 512 MB user memory System Memory 512 MB RAM; 512 MB nonvolatile memory User Memory Approximately 80 MB free user memory Power Consumption 105 VA Input Voltage 100-240 VAC Weight 10.10 lb Ethernet Connectivity and Embedded Network Functions The terminal provides two Ethernet ports for communication with connected industrial control equipment and network infrastructure. The supplied configuration also identifies an embedded switch with Device Level Ring capability for Ethernet network topologies. Three USB host ports provide local connectivity for supported peripheral and service functions. Network configuration should follow the applicable PanelView Plus 7 communication architecture and controller interface requirements. The 1024 x 768 XGA display provides 18-bit color graphics for operator interface visualization. The analog resistive touchscreen supports one million specified actuations with a 100 g operating force. The white LED backlight is non-replaceable and specifies 50,000 h minimum life at 40 deg C to half-brightness. Frequently Asked Questions Q: What touchscreen technology does the 2711P-T15C22A9P use? A: The terminal uses an analog resistive touchscreen rated for 1 million actuations and 100 g operating force. Q: Which physical communication interfaces are provided? A: The supplied specifications identify two Ethernet ports and three USB host ports for external connectivity. Q: What supply voltage is specified for this model? A: The detailed specification identifies a 100-240 VAC input with a stated power consumption of 105 VA. Field Installation Guidelines Mount the terminal using the manufacturer-specified panel cutout and mechanical clearance requirements for the PanelView Plus 7 enclosure. Verify the supplied installation documentation before fabricating the panel because dimensional data is absent from the provided specification. Route Ethernet communication cables separately from high-voltage conductors and high-current switching circuits where practical. Maintain appropriate cable separation to reduce conducted and radiated electrical interference at communication interfaces. Use shielded communication cabling where required by the connected network specification and terminate shields according to site grounding practice. Connect protective earth and supply wiring according to the applicable electrical installation requirements and terminal documentation. Do not apply power until supply voltage, polarity requirements, protective grounding, and connector seating have been verified. Confirm Ethernet addressing, network topology, and Device Level Ring configuration before connecting the terminal to an active control network. Avoid using USB connections as permanent network infrastructure unless the connected peripheral function specifically requires USB communication. Inspect the touchscreen surface and bezel during installation to ensure mechanical loading does not distort the operator interface assembly.