PERF Spider S1 Safety Shoes for Men | Buff Tango Leather | 200J Steel Toe Cap | Anti-Perforation Midsole | Oil & Acid Resistant PU Sole | is 15298:2016 Certified | SRC Slip-Resistant

PROTECTION THAT PERFORMS The 200-Joule imported steel toe cap withstands the kind of impact and compression loads found in warehouses, fabrication units, and heavy industry. Beneath it, a non-magnetic composite anti-perforation plate — certified EN 12568:2010 — guards against nails, rods, and sharp debris across the entire foot surface. Unlike bulky steel alternatives, this plate is 40% lighter, so you gain protection without the fatigue of carrying extra weight through every step. SLIP RESISTANCE THAT EXCEEDS THE STANDARD The single-density PU sole is tested and certified SRC — the highest slip-resistance classification for safety footwear. On ceramic ground with detergent (the hardest test scenario), the Spider scores 0.46 on flat (required: ≥0.32) and 0.33 on a 7° heel (required: ≥0.28). That margin isn’t accidental; it’s engineered. The same sole resists fuel oil volume increase to just 1.1% against a 12% permissible limit, and withstands abrasion loss of only 45 mm³ versus a 150 mm³ ceiling. BREATHABILITY YOU CAN FEEL The upper crafted from Buff Tango Leather delivers water vapour permeability of 4.5 mg/cm²·h (IS requires ≥0.8), and the polyamide lining achieves 5.5 mg/cm²·h. Together, they create a microclimate inside the shoe that prevents the heat build-up and foot fatigue that plague cheaper alternatives. The 8 mm expanded PU insock — covered in anti-bacterial fabric — ensures freshness and cushioning even after back-to-back shifts. ELECTRICAL SAFETY AS A BASELINE Every Spider ships compliant with electrical resistance requirements: 300 MΩ in 85% relative humidity (wet) and 650 MΩ in 30% humidity (dry) — well beyond the IS thresholds. Whether you work on live electrical panels or simply need to prevent static discharge in sensitive environments, the Spider has you covered.