BLP-207-SL DON JO LATCH PROTECTOR

When it comes to securing commercial or residential outswinging doors, protecting the latch from direct physical tampering is paramount. The Don-Jo BLP 207 Blockguard Latch Protector is an industry-favorite security shield engineered to act as an unyielding physical barrier over the door gap, completely stopping intruders from prying, cutting, or shimming the latch bolt open. Designed with a specific 1/4" offset, this latch guard is tailored to fit snugly over doors featuring standard or thick trim molding. It provides maximum coverage directly over the lock area, turning a vulnerable exterior door into a highly secure entryway. Key Security & Design Features Concealed Anti-Tamper Mounting: Features rear-welded flush studs on the back of the plate. Because there are no bolt heads exposed on the outside of the door, intruders cannot cut, grind, or drill the security hardware off from the exterior. Heavy-Duty 12-Gauge Protection: Stamped from thick, commercial-grade 12-gauge (.104") steel or stainless steel, providing the structural rigidity needed to defeat aggressive crowbar and pry-bar attacks. 1/4" Offset Profile: The clever offset design allows the protector to easily clear wide door frames or prominent exterior trim pieces without rubbing, binding, or interfering with the door’s smooth operation. Universal Lock Accommodations: Measuring 7" in length, it delivers localized, high-density protection that sits perfectly alongside standard key-in-knob locks, cylindrical commercial levers, and deadbolts. Specifications Feature Specification Model Number BLP 207 Product Line Blockguard Series Application Outswinging Doors (With Standard or Offset Trim) Dimensions 7" Length x 2-5/8" Width Offset 1/4" Material Thickness 12 Gauge (.104" Thick) Available Finishes 630 (Satin Stainless Steel), SL (Silver Coated), DU (Duronodic Dark Bronze), BP (Brass Plated), 622 (Matte Black) Fasteners Included Rear-welded studs with matching interior hex nuts and washers Secure Through-Bolt Installation Mounting the BLP 207 creates a solid, unified defense that clamps the door face securely: Position the Blockguard: Close the door and align the protector on the exterior face, centering the shield directly over the latch bolt line. Ensure the 1/4" offset clears your frame neatly. Mark & Drill: Mark the exact placement of the two rear studs onto the door face. Remove the plate and drill clean through-holes straight through the door. Bolt from Inside: Push the exterior studs through the drilled holes. From the inside of the building, spin on the provided washers and nuts, tightening them down firmly. Once clamped, your latch area is fully armored against forced entry.